2031037-1-M-Whirlpool-31001529-Door-Seal.jpg
2031037-1-S-Whirlpool-31001529-Door-Seal.jpg 2031037-2-S-Whirlpool-31001529-Door-Seal.jpg 2031037-3-S-Whirlpool-31001529-Door-Seal.jpg

Door Seal

PartSelect Number PS2031037

If this part appears to be too wide for your particular appliance, per the manufacturer, all you have to do is pull it apart.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Takes too long to dry.
  • No heat or not enough heat.
  • Compare At

    $37.44
  • You Save

    $6.24
  • Your Price

    $31.20
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 6 reviews What's this?
1-6 of 6
 

71 of 135 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAndrea from Santee CA

Door seal partially torn off. Lint filter worn with holes.

Parts Select made it extremely easy to order parts from their site. Parts came in a timely manner and very reasonable priced. Thanks to Parts Select! Door Seal just needed to be removed and replaced by pushing into little slot openings.

Help other customers find the most helpful instructions.

Were these instructions helpful?

68 of 131 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerTonja from Green Bay WI

Brooken lint filter and door seal

It was easy - I had my 12yr old daughter do it. The old door seal was completely removed, then you placed the new seal in the apropriate knoches that are on the door of the dryer. The lint filter just had to be placed in the vent. - Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Door Seal

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLeo from Belle Chasse LA

Dryer door seal broken

It was easy. Just removed the old seal and plugged the new one in place. Took less than 3 minutes

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Door Seal

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

Tools

CustomerThomas from Dennisville NJ

Had to align tabs on the seal, which are differently spaced, with the holes in the dryer door.

Pulled the old seal off then pushed the new one in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLeslie from Creve Coeur MO

Rubber gasket door seal was torn

I pulled the old one off and put the new one on. It took about 3 minutes because I also replaced the old lint filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

19 of 294 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerDonald from Blauvelt NY

Dry was heating intermittently at first and then stopped heating.

I first confirmed that the ingitor was working (because I could see it glow with the lights off at the bottom of dryer). I read within Parts Select that intermittent heating was likely the coils and that I could test their resistance to confirm that this was the problem. I removed the coils (very easy) and thenI checked their resistance with a tester. The resistance on one of them was reading 600 ohms instead of the required 1300 ohms. So I replaced them both and presto it works fine. I also took the opportunity to thoroughly clean out the lint (accessible with the front panel removed) and I replaced the lint filter which was ripped and the gasket around the door which was missing a piece. All very easy to do and parts select made it a cinch. For safety I made sure that the gas and electric were off before I did any of this work. oh, I also levelled the foot which made my wife happy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-6 of 6