Quick Question!

Have you ever purchased from PartSelect.com before?

2029752-1-S-Whirlpool-306062-Transformer
2029752-1-S-Whirlpool-306062-Transformer 2029752-2-S-Whirlpool-306062-Transformer 2029752-3-S-Whirlpool-306062-Transformer http://www.partselect.com/Schematics/Maytag/MA56B5.gif

Transformer

PartSelect Number PS2029752

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$65.54

You Save

$10.92

Your Price

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 2 reviews What's this?
1-2 of 2
 

7 of 8 people found this instruction helpful

Parts Used:
  • Transformer
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Luis from Naperville, IL

Controller board display showed error f for both dryers on running mode but it wouldn't accept any command; went into the set up and here display showed f5. C

The difficult part was to find what component was bad. Maytag does not sell the manual for this machine any more. We could not figure out what the problem was until we decided to check the voltage on the board and compare it to a second machine that we have. The second machine showed different readings so we decided to compare voltages on the transformer (main) that is at the bottom of the machine. There is a Primary (110 volts) and two secondaries; one which output is about 26 VAC and the other is above 10 VAC. The bad transformer had no output in one of the secondaries. Replacing the transformer was pretty simple. Make sure to disconnect the machine please before doing the repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
  • Transformer
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: karl from Fair Haven, MI

Thunder storm blew out transformer

after changed transformer circut doard starting smoking may call a repairman.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2