11740616-1-M-Whirlpool-WP28808-V-Style Drive Belt (32.5 inches long)
Part Location Diagram of WP28808 Whirlpool V-Style Drive Belt (32.5 inches long)
See part 13 in the diagram
( Grid squares measure 1x1 inch )
11740616-1-S-Whirlpool-WP28808-V-Style Drive Belt (32.5 inches long) 11740616-2-S-Whirlpool-WP28808-V-Style Drive Belt (32.5 inches long) 11740616-3-S-Whirlpool-WP28808-V-Style Drive Belt (32.5 inches long) Part Location Diagram of WP28808 Whirlpool V-Style Drive Belt (32.5 inches long)
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

V-Style Drive Belt (32.5 inches long) WP28808

 Fits your HA4591!
★★★★★
★★★★★
3 Reviews

Rated by 13 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 43.27
  On Order
Get FREE EconoShip on orders over $100! T&C apply
 Fits your HA4591!
PartSelect Number PS11740616
Manufacturer Part Number WP28808
Manufactured by Whirlpool
Product Description

V-Style Drive Belt (32.5 inches long) Specifications

This v-style drive belt is thirty-two and a half inches long and half of an inch wide.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not agitate | Leaking | Burning smell | Will not drain
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Amana, Crosley, Speed Queen, Maytag.
Part# WP28808 replaces these:
28808, R0606539
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.7
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dick P - June 8, 2019
  Verified Purchase
Great
Right part
★★★★★
★★★★★
Paul M - January 16, 2019
  Verified Purchase
great part easy to replace
good company to deal with. worked great
★★★★★
★★★★★
Patrick M - June 19, 2018
  Verified Purchase
All well,exact fit,thank you for being you
I have nothing but praise for you all.So nice to have the parts available to fix it myself and to get the wash caught up.thanks again.Peace & Love.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 13 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water Pump Leak
Un plug machine. Turn off hot & cold water. Remove the front panel by removing the 2 screws at the botton & lift front from the bottom until it unhinges from the top. Tilt the washer back far enough to put a contaner to catch the water left in the hoses. Loosing the hose clamps so the water comes out slowly. If you remove the hose to fast your container won't catch the water. Do one hose at a time. Next disconnect the wiring harnes from the motor. Remove the 4 screws holding the pump/motor. Disconnect the belt from the washer. You will have to tilt the pump/motor to get slack in the belt. Remove the pump/motor & the belt will come with it. This is when I found that the belt was toast & I had to order a belt. Paid shipping twice. once for pump & once for belt. Seperate pump from motor by removing 3 screws. My pump came right off. Reverse the operation to install. REMEMBER TO PUT THE BELT ON BEFORE THE PUMP.
Read less
  • Brian from Hopewell, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pump leaking. Replaced aging belt.
Removed front cover of machine. Removed motor/pump assembly which was held in by four (4) bolts. At the same time removed belt from transmission pulley. Removed pump assembly from motor, held in by three (3) torx fasteners. Before installing new pump installed new belt on motor assembly. While setting the motor/assembly in place threaded belt around transmission pulley. Fastened motor/pump assembly. Very easy process!
Read less
Other Parts Used:
V-Style Drive Belt (32.5 inches long) Drain Pump
  • Christopher from Dearborn, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking pump, torn belt, washer 24 yrs old
Please read the comments from other people before you start the repair. The hints are great, and save you time.
Removing the old pump from the shaft with two screwdrivers
by gently prying it off the shaft was the best idea. Once the pump is removed from the motor, it is a snap to replace the belt, and tension pulley if necessary.
The metal surfaces are sharp inside the machine, and I suggest placing a good light inside the machine so that you can see where the belt goes. Follow Joseph's instructions from Goldsboro NC to a tee, and your repair will be a great experience.
Peter
Westport, Ma
Read less
Other Parts Used:
V-Style Drive Belt (32.5 inches long) Drain Pump
  • Peter from Westport, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wouldn't agitate or spin.
This was my fist time attempting to fix a washer. I had to guess on the length of the belt since the model number on the machine had worn off and the belt had snapped in a way that made determining the length difficult. At first, I ordered a belt that was too small. I realized this after I was unable to remount the motor stand onto the bottom of the machine. This model had the motor assembly right in front of the unit. It was easily accessed after removing the panel on the front of the machine. It was easy to remove the 4 screws (they were all visible) on the motor stand. After that I was able to disconnect the pump belt. This machine has seperate belts for agitation and the pump. The pump belt must be removed in order to install the agitator belt because they both are driven by the same shaft and the pump belt is positioned on the bottom. There is also a tension wheel for the agitator belt which might be easily overlooked. Make sure to install the agitator belt so that the tension wheel is on the outside of the belt's path. The whole job is fairly easy if you have the right part to begin with. If you have to force the belt onto the wheels, then you probably have a belt that is too small.
Read less
  • Eric from Akron, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Frayed V-belt
VERY EASY!!!
SAFETY FIRST-Always unplug the appliance.
Use 8mm socket to remove front panel screws. Loosened up two hose clamps connected to the pump and removed both lines (Hoses contain water, use a towel) which is located underneath the motor. Disconnect motor electrical connector on the left side of the motor. With socket, remove 4 mounting bracket screws that secure the motor and pump assembly. Pull back the tension/idler pulley to loosen belt off the main pulley to the washer drum. Tilt and pull out motor/pump assembly. Underneath the pump, use star-bit to remove the pump from motor assembly to remove the belt. Install new belt on motor pulley (Good time to check for debris or anything restricing free movement of pump) and re-install pump. Install the motor/pump assembly and loosely secure the motor/pump assembly. Place the belt onto the motor pulley and pull back the tensioner/idler pulley to allow slack of belt to be placed on washer drum pulley. Put the belt on the lip of the drum pulley and rotate while pulling back the tensioner/idler pulley until the belt is seated on the groove of the drum pulley. Tighten the motor/pump assembley. Re-attach the 2 hoses and tighten down the clamps. Re-connect the electrical connector to the motor...Don't forget to plug in the washer and secure the front panel...Piece 'O cake, you're done! About 15 minutes to do the job. Much like changing a belt on most vehicles.
Read less
  • John from Milton, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
59 of 66 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was leaking from the bottom of the machine, tub wasn't filling
This was on a machine at a friends house I was watching while he was away. I spent more time looking for tools than the actual repair. Once I figured out how to get the front panel off (two bolts at the bottom of the front panel) the problem was easy to diagnose, water was running out of the pump seal. When the parts arrived the repair took about 15 minutes. Shut offpower. remove the 2 bolts holding the plastic cover over the wiring harness, remove the cover and unplug the wiring harness. Losen up the clamps on the hoses to the pump. Place a towel or drip pan under the pump when you pull the hoses lose. Next remove the four bolts at the base of the motor/pump mount. Slip the belt below the bottom of the tub pulley and remove the motor/pump assembly. Remember the position of the idler/tensioner pulley in relation to the belt. Pull the pump off the shaft by removing the three torx head screws holding the pump to the bracket and replace. Reverse the procedure to reassemble. It is a good idea to replace the belt when replacing the pump, the one in the machine I was repairing was cracked and dry, on its last lap. Good luck.
Read less
Other Parts Used:
V-Style Drive Belt (32.5 inches long) Drain Pump
  • Charles from Cliff, NM
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
14 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water leaking not agitating and shaking in spin cycle
remove front panel. unplug motor. remove 4 screws and take motor,pump,idler and belt assembly out. remove pump from bottom of motor. 3 screws held pump and drove off with hammer. replace idler and install belt before new pump. install pump. reinstall assembly. works good now.
Other Parts Used:
V-Style Drive Belt (32.5 inches long) Idler Pulley Wheel Drain Pump
  • matt from bruce crossing, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water pump leaking, belt 20 years old
Removed motor apparatus with socket, took off water pump with star srewdriver . Installed new pump. Replaced belt. Schematic diagram big help...
Other Parts Used:
V-Style Drive Belt (32.5 inches long) Drain Pump
  • Dennis from Pensacola, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Was leaking water
Just took it apart and figured out what was leaking. Ordered a piece online through Partselect. Got the piece in 2 days and put it back together. Went real smooth, saved us from buying a new washing machine. Thanks! My husband is quit the handy man too! So I thank him too!
Other Parts Used:
Drain Pump V-Style Drive Belt (32.5 inches long)
  • Christine from Marengo, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Socket set, Wrench set
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
none
took the drive belt to the pump off then put the belt for the drum on .then put the belt for pump back on. basickly this unit is one of the easist to work on
  • C from Palatine, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11740616
Manufacturer Part Number: WP28808
Brand
Model Number
Description
Amana
AA3110
Washer - Top Loading
Amana
AA3111
Washer - Top Loading
Amana
AA3210
Washer - Top Loading
Amana
AA3410
Washer - Top Loading
Amana
AA4110
Washer - Top Loading
Amana
AA4111
Washer - Top Loading
Amana
AA4210
Washer - Top Loading
Amana
AA4211
Washer - Top Loading
Amana
AA4410
Washer - Top Loading
Amana
AA4411
Washer - Top Loading
Amana
AA5121
Washer - Top Loading
Amana
AA5220
Washer - Top Loading
Amana
AA5221
Washer - Top Loading
Amana
AA5222
Washer - Top Loading
Amana
AA5420
Washer - Top Loading
Amana
AA5421
Washer - Top Loading
Amana
AA6121
Washer - Top Loading
Amana
AA6221
Washer - Top Loading
Amana
AA6421
Washer - Top Loading
Amana
AA7131
Washer - Top Loading
Amana
AA7231
Washer - Top Loading
Amana
AA8431
Washer - Top Loading
Amana
AA9131
Washer - Top Loading
Amana
AA9231
Washer - Top Loading
Amana
AA9431
Washer - Top Loading
Amana
AWE852
Washer - Top Loading
Amana
AWE931
Washer - Top Loading
Amana
AWE951
Washer - Top Loading
Amana
AWM190W
Washer - Top Loading
Amana
AWM190W2
Washer - Residential, Automatic
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
V-Style Drive Belt (32.5 inches long)
$ 43.27
  On Order
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.