BBB A-Plus

V-Style Cogged Pump Belt

PartSelect Number PS2027990

This V-style cogged tooth pump belt is used in conjunction with the drive belt in your washing machine. The manufacturer suggests replacing both belts at the same time.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not drain
In Stock

  • Compare At

    $21.80

  • You Save

    $3.63

  • Your Price

    $18.17
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts

Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

V-Style Drive Belt

Part Number 2028289

$13.02
  In Stock

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-2 of 2

 

4 of 4 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers

CustomerKevin from Grayslake IL

Washer stopped pumping discharge water

The only real problem was one spring loaded hose clamp to the rear of the pump. If it had been a standard clamp like the others I would have cut the repair time down by 2/3rd's. I did find that by removing one of the long wash drum springs, I then had more room to get my channellocks back there to get the stupid clamp to compress, and then used a screw driver to push the clamp back off the the connecting port. I replaced the camp w/ a standard clamp and the reassembly went quick and easy. Note, If you replace the pump drive belt with a new one, you WILL have to adjust the belt tension after a few minutes use.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 11 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerStanley from Lebanon IN

Worn belt

Released idler pulley and replaced belt

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-2 of 2