| |
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyDifficult
Time to do repair:More than 2 hours
ToolsNutdriver, Pliers, Socket set
CustomerDavid from Raytown MO
Idler pully seperated from bushing
first I unplugged the electrical plug then I removed the lower covet by taking out the 5/16 screws. I then took out the 5/16 screws that hold the top part of the front cover and removed it.
I then worked the belt off the aggitator pully and removed the hoses from the pump. I then used a 1/2 in soclet on long extension th remove the four bolts that hold the motor and pump assembly. I then worked the assembly out of the cabinate and using a long #20 torx bit I removed the pumfrom the housing. I removed the belt, then I removed the housing off the motor and replaced the Idler bracket with the idler pully. I then re-assembled it in the reverse of taking it apart. Works great with the new idler and belt.
David Hilton
|