13 of 22 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
CustomerJohn from Cumberland MD
Washing machine beat itself to death during spin cycle
Removed front cabinet, removed 6 springs holding tub down, removed pump hose, removed drive belt from motor,lifted tub out the top and placed upside down, loosened all six hex bolts(did not loosen or remove drive pulley) backed all six bolts out and left 4 threads showing, slipped old snubber out cleaned all surfaces with alchohol and slid new snubber in. Put corn starch on base where snubber rides, lifted tub back in, hooked up all six tension springs with auto brake tool.put belt back on...done..no more beating itself to death.
11 of 24 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:15 - 30 mins
CustomerJerry from Dayton TX
Front legs came off while moving causing cycle pulley to rub on the floor.
Removed damaged pulley installed new pullley and clutch. The directions made it easy. Aligned pulley as detailed and installed new front feet and tested washer. Took me about 30 minutes to repair. Washer has been working since. Thanks guys for a nice no nonsense package.