2021882-1-S-Whirlpool-22004481-Dispenser Lid
2021882-1-S-Whirlpool-22004481-Dispenser Lid 2021882-2-S-Whirlpool-22004481-Dispenser Lid http://www.partselect.com/Schematics/Maytag/59113.gif

Dispenser Lid

PartSelect Number PS2021882

This part is used to cover up the dispenser.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Lid or door won’t close.
  • Lid or door will not open.
  • Compare At

    $20.21
  • You Save

    $3.37
  • Your Price

    $16.84
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Short Hinge Pin

Part Number 2202583

$2.92
On Order

Hinge Pin

Part Number 2344472

Sold individually. This part is exactly 1 inch long.

$4.77
In Stock

Dispenser Bezel

Part Number 2020221

This part mounts to the top panel of the washer and houses the dispenser.

$21.82
On Order

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 20 reviews What's this?
 

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Pliers
Customer: bill from brighton, MI

Lid hinge was broken, lint screen had a hole in it.

Remove part from package. put in place. press in pins. done. Now I'm ready to fix the tub bearings and the wax motor ! save $500 or more.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Sarah from Ephraim, UT

The repair went really quick. My husband was able to do it in about 5 minutes. Also the service was amazing. We ordered the part and we got it 3 days later. I have no complaints about ordering from this company and am sure that if I need to get new parts in the future this is where I will get them.

There was 4 screws that held the bevel in that still needed to be removed from the old broken one. Once we removed those we were able to place the new bevel and lid in the correct sport, replace the screws and viola, perfect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: anne from gaston, OR

Fabric softner, and bleach dispenser not working

First off, unplug the machine.
Next remove the existing screws in the plastic dispenser. Then remove the door, there are two screws holding the door on connecting two brackets which need to be lifted to get them to release.
That gives you the access to the remove the front panel, which is done by pulling on the panel itself.
Once that is done you need to remove the two screws that are in the corners upper left, and right that are holding the brackets that hold down the top of the machine. Remove the brackets by gently turning them.
Once done the lid should easily lift up.
The dispenser can then be disconnected by removing the 2 rubber hoses on top and the the larger rubber hose on the bottom along with the electrical connections under the unit. Keep track of which wire goes to which lead.
After removing the dispenser just do everything in reverse.
The machine is like new, and the repair took about 45min and saved me at least $200 dollars.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Dispenser Lid
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Pliers
Customer: Margaret from Burleson, TX

Dispenser lid plastic around metal pins that insert into washer broke so it fell off everytime I opened to add soap etc

I got the part, but it did not come with the pins needed to insert into slot in washer. I had to go to Lowes and buy some pins and improvise to make them fit on both ends. It is working well....Probably saved myself $100.00 (service call etc) Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Barbara from Plymouth, MN

Dispenser lid cracked at hinge.

I removed the dispender assembly from compartment. (Four phillips head screws.) Attached new lid to the dispenser housing. Cleaned the surface where assembly had been sitting on. Reattached the assembly unit to the washer. Looks good!

Help other customers find the most helpful instructions.

Were these instructions helpful?