BBB A-Plus
2021880-1-M-Whirlpool-22004477-Door-Boot-Drain-Hose.jpg
2021880-1-S-Whirlpool-22004477-Door-Boot-Drain-Hose.jpg 2021880-2-S-Whirlpool-22004477-Door-Boot-Drain-Hose.jpg

Door Boot Drain Hose

PartSelect Number PS2021880

This part may differ in appearance, but still functions same as original.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking water
In Stock

  • Compare At

    $20.98

  • You Save

    $3.50

  • Your Price

    $17.48
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts

Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Bellow

Part Number 2003890

Also known as the door boot seal. This part includes the drain and plug. The seal is located around the door of the washer to prevent water from leaking.
$69.70
  In Stock

SHIELD

Part Number 2020819

$4.60
  In Stock

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-2 of 2

 

5 of 7 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerBrandon from Berea OH

Bad pump

I took off the rear panel and removed the hose clamps and electrical terminals, slid pump out of slot in bottom pan of washing machine. It only took minutes, this was part of a major overhaul. I replaced this as a precautionary measure. Great prices and quick service,

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsScrew drivers, Socket set

CustomerTJ from WARWICK NY

Mold on door boot, replace door boot

followed the approach on fixya.com. when installing new boot and cable loop, found it easier to remove drum cover from machine (held on with simple clips). Then you can install boot onto the cover and the door frame. Putting everything back in machine and re-attaching the various braces took only a couple of minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-2 of 2