2021558-1-S-Whirlpool-22004042-Agitator Assembly
2021558-1-S-Whirlpool-22004042-Agitator Assembly 2021558-2-S-Whirlpool-22004042-Agitator Assembly 2021558-3-S-Whirlpool-22004042-Agitator Assembly http://www.partselect.com/Schematics/Maytag/56004.gif

Agitator Assembly

PartSelect Number PS2021558

This includes the upper and lower parts of the agitator.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not agitate.
  • Noisy.
  • Compare At

    $95.23
  • You Save

    $15.87
  • Your Price

    $79.36
In Stock
Order within the next 55 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 12 reviews What's this?
1-5 of 12
 

68 of 94 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: ERIC from DUMONT, NJ

Auger assembly on maytag washer was missing two agitation fins

I ordered the necessary parts which were so easy to find with Model Number of the Washer, ordered parts on a Tuesday and recieved them on a Friday!, wow was I surprised.
I simply removed the softener dispenser, used a socket set to remove single bolt and pulled broken agitator out and installed the new one after replacing the bolt.

Help other customers find the most helpful instructions.

Were these instructions helpful?

21 of 23 people found this instruction helpful

Parts Used:
  • Agitator Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: David from Holcombe, WI

Sneakers broke fins off the agitator

I first grasped the fabric softner dispenser and pulled it up and off agitator. I then removed the bolt from the center of the agitator with a 1/2" socket, 8" extension and ratchet. I grasped the agitator assembly and pulled it up and off. Reversed the procedure to install. The bolt can be started by placing a piece of paper towel over the socket, then inserting the bolt into the socket. It will hold it there while you start the bolt. I also took the opportunity to clean the accumulated soap scum from under the agitator while it was disassembled. An easy fix!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

12 of 16 people found this instruction helpful

Parts Used:
  • Agitator Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Socket set
Customer: Gerald from Spring, TX

Washer would not agitate

Remover agitator/Auger assembly. Install new agitator/auger assembly. Washer still would not agitate. Called repairman and found the transmission was bad. Fortunately transmission was still under warranty. 10 year warranty on transmission.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 6 people found this instruction helpful

Parts Used:
  • Agitator Assembly
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: Robert from Suisun City, CA

Auger top would hit the top lid

The replacement was very easy, just one bolt and RR was a snap. However, the first part that came was defective and I called the 800 number, spoke to the rep and the part came the next day. Excellent customer service, and would do business again

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 6 people found this instruction helpful

Parts Used:
  • Agitator Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Socket set
Customer: Charles F from Brooklyn, OH

Auger was broken

Needed a medium extension and a rachet a screw driver and a 13mm socket. I used a short screw driver and inserted in it the softer container and lifted it strait up to get the softner container out of the way. I used the medium extension to reach in the auger and loosen the small bolt holding the auger on the machine. Pulled it up and out. Reversed the above procedure and it was set to go. Total time about 8 to 10 minutes. Thank for all the help Kudos to all including Susan W.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 12