Timer Knob

PartSelect Number PS2021514

This is the second part of a three-part knob. The cap and the skirt are sold separately. This knob is blue and white in colour.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Timer will not advance.
  • Compare At

    $18.44
  • You Save

    $3.07
  • Your Price

    $15.37
In Stock
Order within the next 1 hr and 37 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 7 reviews What's this?
1-7 of 7
 

10 of 10 people found this instruction helpful

Parts Used

  • Timer Knob

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerhuong from bentonville AR

Been pull with plier to get it to run.

replaced timer and pull knob. easy and work great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerJohn from Sterling Heights MI

Knob broke off dryer timer

The two parts purchased were the corrects parts needed to do the job. (There's always a first time for everything!) When the plastic timer knob broke away from the timer stem, it left the silver timer cap's locking pin embedded in the timer stem. I could not remove the broken remains of the knob while the broken off pin was still in place. And it was impossible to grip the pin with pliers or tweezers without damaging the timer stem. As a solution I grabbed my whole-house vacuum cleaner hose and sucked the broken pin out of the timer stem. Total time of repair was about 20 minutes not including the two-hour brainstorming time-out that led me to the vacuum cleaner solution.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 10 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSudeepto from San Diego CA

Broken plastic twirl knob shaft on timer assembly and chrome timer cap

0. Disconnected the dryer power supply
1. Removed the control panel (3 screws, star bit)
2. Detached the electric power supply cords from the timer assembly (took a bit of easing back and forth - do not pull by the electric cords, pull the socket itself)
3. Timer assembly eased off subsequently (held in place by three unscrewed receptacles)
4. Installed the new timer assembly, plugged back the supply cords, and installed the new timer knob, skirt and chrome cap.

They don't build Maytag equipment as they used to. We bought a fridge, washer and dryer 6 years ago - all three of them have had component, part stress and/or electronic sensor failures :-(

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerBobby from Ridgely TN

Dryer would not run=bad timer

simply replaced the timer.thank you for perfect service

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerAndrew from Beaver Falls PA

Timer knob was broken so the knob would not stay on

I removed the silver cap and then removed the knob itself. I replaced the knob with the new part and also the silver cap with the part. The job was complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customerleslie from san diego CA

My timer knob and dryer knob broke on myd

I went to maytag website and ordered the parts it was so nice all I did was enter model number and it gave me easy interactions to order parts I needed. I repaired it myself with parts I ordered and with the instructions it came with it guided me step by step and the best part is I saved money on paying someone to do the labor!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerNancy from Fairfield NJ

Time cap broke away from timer

Removed Screws on panel, pluged new timer into wire replace panel, but on new knob and cap and it was ready to go.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-7 of 7