| |
10 of 13 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Wrench set
CustomerThomas from Doral FL
Washer wouldn't start with lid closed as it should
First, removed two phillips screws that hold instrument cluster in place.
Second, slid instrument cluster off washer.
Third, removed washer lid.
Third, removed faulty switch, removed guide tube and plunger.
Replaced switch, guide tube and plunger.
Removed old and replaced new lid cam.
Reassembled lid and instrument cluster.
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerPat from Knoxville IA
We were standing on the lid of the washing machine and broke the little plastic doohunky off so we ordered a new one and it is fine now.
First we stuck cardboard in the hole until the new plastic part came and then we snapped it into place. I feel like a rocket scientist...but I learned that you should not stand on your washing machine lid.
|