2021471-1-S-Whirlpool-22003941-Lid Cam
2021471-1-S-Whirlpool-22003941-Lid Cam 2021471-2-S-Whirlpool-22003941-Lid Cam 2021471-3-S-Whirlpool-22003941-Lid Cam

Lid Cam

PartSelect Number PS2021471

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Will not agitate.
  • Compare At

    $8.90
  • You Save

    $1.48
  • Your Price

    $7.42
On Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

GUIDE TUBE

Part Number 2020567

$7.22
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 3 reviews What's this?
1-3 of 3
 

18 of 20 people found this instruction helpful

Parts Used

  • Lid Cam

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichael from Harrisburg NC

Wash cycle failed to start occasionally.

Replaced cam in lid. Simple repair, even a novice could preform.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 11 people found this instruction helpful

Parts Used

  • Lid Cam

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAnthony from DeKalb IL

Peice worn out, not letting washer cycle after filling

Other peice broken or worn out. Poped old one off and new one in......YAHOO!! back to washing clothing again......

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Lid Cam

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMathew from Fort Collins CO

Washer would fill, but not spin, agitate of drain

Very simple, Lid cam part was broken, Just need to remove broken plastic lid cam with screwdriver and then snap in place the new piece. Worked like a charm first time. Easy , inexpensive repair to a reliable washing machine. Bill

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3