13 of 18 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerJonathan from Park Forest, IL
No spinout or regular motor speeds
remove back panel 3 phillips and 2 1/4" machine screws. checked lid switch for proper contact. checked timer on the spin cycle in regular wash mode and tested the contacts that were requested per schematic with washing machine. verrified that the timer was the problem, actually if you take the plasic cover off you can see the contactors and if you look for the one that is bad you can verifiy by looking for burned contacts, rember that everything electrical is testable there should be no guessing.
replaced the timer and tested washing machine in regular and passed, re-assembeled back cover.
13 of 26 people found this instruction helpful
Level of DifficultyReally Easy
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerArthur from Hettick, IL
Timer just wore away leaving only delicate cycle
Replaced timer by myself easily with some tools