2020896-1-S-Whirlpool-22003269-Lock Hoop Door Assembly
2020896-1-S-Whirlpool-22003269-Lock Hoop Door Assembly 2020896-2-S-Whirlpool-22003269-Lock Hoop Door Assembly

Lock Hoop Door Assembly

PartSelect Number PS2020896

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $21.82
  • You Save

    $3.64
  • Your Price

    $18.18
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 3 reviews What's this?
1-3 of 3
 

27 of 36 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerDavid from San Juan Capistrano CA

Front loading door would not stay locked when starting a wash cycle

The door had become more difficult to close and then eventually stopped locking. The relay worked but the mechanical mechanism was not working properly.

I did not use a manual. Just read some tips for removing the latch assy.

Latch Assy:

1. Removed the four screws that hold the lid to the detergent.
2. Remove the door and the 2 screws holding the door frame (opposite door hinges).
3. Pull the front panel forward, then remove a screw from each side that holds the washer top lid in place (nut driver).
4 Remove two screws that hold the latch assy (nut driver).
5. Unplug the wiring harness.
6. Reassemble in opposite order.

Lock Hoop Door Assy:

1. Remove the four screws that hold the door together and separate into two pieces.
2. Follow instructions to remove lock hoop (instructions should come with new assy)
3. Reassemble.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 17 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

Customerivan from decatur IL

Door was locked

first i took the dispenser out for the soap, bleach , softerner. then took the four screws out of the inner front, panel at the opening removed it then, it had to 5/16 bolts at the top, to release the top of washer flip the lid open, and removed the latch assembly removed the three wires for the motors and put it back , as same as taking it apart. here's a hint,, if you need to open door there is a plastic line in the soap tray under it, pull , it will release the lock, mine was green color like weed eater line , it helps alot to have it open, thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 15 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerJoseph from San Jose CA

Door won't close properly

Removed and replace the old spring and it close properly again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3