Control Board

PartSelect Number PS2020755

If the resistor is burned on the board, that indicates there might be another problem.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Pumps but will not spin.
  • Compare At

    $347.06
  • You Save

    $57.84
  • Your Price

    $289.22
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 1 reviews What's this?
1-1 of 1
 

16 of 20 people found this instruction helpful

Parts Used

  • Control Board

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerStephen from Amity OR

Intermittent fill, rinse, door lock, and temp control.

Removed five screws from rear of control panel.
Removed two control board mounting screws.
Replaced control board.
Replaced all screws.
Washer worked except for temp control.
Opened front door and removed four screws.
Removed front panel.
Removed two lock tab screws and locking tabs.
Lifted up top of washer.
Unplugged cable from thermistor.
Closed washer top and reinstalled locks and front panel.
Temperature control switch now controls temperature without using the thermistor+.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1