1 of 3 people found this instruction helpful
- Single Washer Inlet Strainer
Level of Difficulty: Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Socket set, Wrench set
Customer: DAVID from SANDY HOOK, CT
Bad tube seals and bearings
Disassembled washer as per directions with seal kit. Removed inner tub. Cut both tub shaft bearing in half; punched out from outter tub. Installed new bearings using .5 inch threaded rod, washer and bolts. Installed new seal on inner tub shaft. Installed inner tube. Re-assembled washer.