1 of 1 people found this instruction helpful
- Single Washer Inlet Strainer
Level of DifficultyDifficult
Time to do repair:More than 2 hours
ToolsNutdriver, Socket set, Wrench set
CustomerDAVID from SANDY HOOK CT
Bad tube seals and bearings
Disassembled washer as per directions with seal kit. Removed inner tub. Cut both tub shaft bearing in half; punched out from outter tub. Installed new bearings using .5 inch threaded rod, washer and bolts. Installed new seal on inner tub shaft. Installed inner tube. Re-assembled washer.