1 of 3 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Pliers, Screw drivers
CustomerROD from HENDERSONVILLE TN
Washer would not pump water out
Loosened 2 hose clamps with nut driver
Unplugged 2 power wires with pliers
Twisted motor in washer base to align with large holes and removed it
Attached wires to new motor
Replaced new motor, twisted back in base
Attached 2 hoses and tightened hose clamps
Test washing worked fine
Hose outlet no longer available with cylindrical filter, so current hose without filter is being used.
Lint fiter simple front load replacement for old one in Maytag MDE3000AYW dryer.