Water Inlet Valve

PartSelect Number PS2020521

May look different than the original, but will function the same.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • No hot or cold water.
  • Leaking.
  • Compare At

    $74.05
  • You Save

    $12.34
  • Your Price

    $61.71
In Stock
Order within the next 10 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

5 of 7 people found this instruction helpful

Parts Used

  • Water Inlet Valve

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerBryan from Houston TX

No cold water on any setting

1.) PULLED WASHER AWAY FROM WALL
2.) DISCONNECTED POWER AND REMOVED SUPPLY HOSES FROM VALVE
3.) REMOVED VALVE MOUNTING BRACKET FROM WASHER. WITH 8MM SOCKET
4.) DISCONNECTED WIRING HARNESSES FROM VALVE AND REMOVED VALVE FROM BRACKET WITH PHILLIPS SCREWDRIVER.
5.) INSTALLED NEW VALVE AND COMPLETED REPAIR IN REVERSE ORDER.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Water Inlet Valve

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Socket set

CustomerAntonio from Falls Church VA

The previous valve had a slight leak after shutting down.

The key is knowing what to open to get to the valve. The top of the washing machine lifts up once you push back the spring clips in the front. After that, it was easy to remove the old valve and replace it with the new one. The instruction sheet provided also helped.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Water Inlet Valve

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers

CustomerRichard from Calabash NC

Water dripping after shut off

Opened top of washer, used nut driver to remove part. Disconnected part and replaced with new part. Reassembled parts, turned on water, and everything was fine. The directions sent were of great help.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3