| |
13 of 17 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:More than 2 hours
ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench set
CustomerPaddy from Ferndale WA
Bearings went out in the drum.
purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in..
|
5 of 9 people found this instruction helpful
Parts Used
Level of DifficultyDifficult
Time to do repair:1- 2 hours
ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench set
CustomerBradley from Round Rock TX
Trips imbalance too easily; wouldn't drain
Removed front door and front skin, tipped up top cover and replaced two front suspension springs (added grease lube onto spring hooks.) Tipped machine forward onto its front face, removed rear cover then removed rightside strut assembly. Installed new then removed left strut assembly. Installed new. Tightened all components. Repaired broken power wire to the remote pump. Tipped back upright, restored all skins and tested function. Washer was fully repaired with excellent cleaning results.
|