2019934-1-M-Whirlpool-22001969-Unbalance-Lever-and-Lid-Switch-Actuator-Assembly.jpg
2019934-1-S-Whirlpool-22001969-Unbalance-Lever-and-Lid-Switch-Actuator-Assembly.jpg 2019934-2-S-Whirlpool-22001969-Unbalance-Lever-and-Lid-Switch-Actuator-Assembly.jpg 2019934-3-S-Whirlpool-22001969-Unbalance-Lever-and-Lid-Switch-Actuator-Assembly.jpg

Unbalance Lever and Lid Switch Actuator Assembly

PartSelect Number PS2019934

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not start.
  • Compare At

    $19.19
  • You Save

    $3.20
  • Your Price

    $15.99
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 2 reviews What's this?
1-2 of 2
 

8 of 12 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerSUZANNE from MODESTO CA

Washer dead after unbalanced load

Unplugged washer, turned off water supply,Removed the screws in back of console. removed. back plate, unplugged lid switch from console. removed screws holding console to frame of machine. Removed lid by prying the bottom corners out freeing the hinge ball on either side. unscrewed the lid switch from the frame of machine. installed the new plunger screwed into place aligned with lid switch snapped new switch in place, plugged in to console. put screws back into console and put back plate back on turn water supply on plugged in washer started washer which is now working . and the repair guy who never showed up wanted to charge me 50. diagnostic fee when I told him itwas the switch. it cost me less than 50 for all the parts. if you can read you can do

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

  • Unbalance Lever and Lid Switch Actuator Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerpetrose from blaine circlepine MN

No problem

befor start i make sure whether i can repair or not.then i order the part which is fit with what i wont to repair.by checking siriel number . then repairng is very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2