2019803-1-S-Whirlpool-22001821-Agitator Auger and Base Assembly
2019803-1-S-Whirlpool-22001821-Agitator Auger and Base Assembly 2019803-2-S-Whirlpool-22001821-Agitator Auger and Base Assembly

Agitator Auger and Base Assembly

PartSelect Number PS2019803

This part does not include the dispenser cup that is found on the top of the upper agitator.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not agitate.
  • Compare At

    $86.98
  • You Save

    $14.50
  • Your Price

    $72.48
In Stock
Order within the next 10 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 7 reviews What's this?
1-7 of 7
 

35 of 48 people found this instruction helpful

Parts Used

  • Agitator Auger and Base Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerBeverly from Conehatta MS

Agitator top section was broken

Loosened set screw, removed agitator, installed new agitator and tightened set screw
done

Help other customers find the most helpful instructions.

Were these instructions helpful?

18 of 25 people found this instruction helpful

Parts Used

  • Agitator Auger and Base Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerSteve from Check VA

Agitator not agitating

old agitator stripped plastic splines.
pulled up and out old agitator, aligned and pushed (hard) down new agitator, tightened nut.
easy-squeezy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 18 people found this instruction helpful

Parts Used

  • Agitator Auger and Base Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerMichael from East Liverpool OH

The top part of the agitator was loose and would rotate.

A 5/16 socket on a ratchet was used to loosen a screw. Remove the agitator from the splined shaft by pulling straight up. Slide the new agitator onto the splined shaft and tighten the new supplied screw.

Help other customers find the most helpful instructions.

Were these instructions helpful?

13 of 17 people found this instruction helpful

Parts Used

  • Agitator Auger and Base Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerManuel from Vacaville CA

Top auger section won't stay locked together

Ordered a new replacement agitator, removed the old agitator with the loosening of set screw on the base of agitator, which slips over the gear spline and installed the replacement agitator, tighten the set screw with nut driver, OH, you have to use the fabric softener cup, which snaps off the old agitator and install it on the new agitator. Wha-la!

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 14 people found this instruction helpful

Parts Used

  • Agitator Auger and Base Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerScott from Lac du Flambeau WI

Agitator was slipping,

Removed 1 screw with 5/16'' nutdriver on lower area of agitator and unit slipped off spline like butter. Replaced with new unit and simply tightened the holding screw. Repair Dude wanted 179.50 for this repair. I saved over $100.00 doing this myself. Cool.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 13 people found this instruction helpful

Parts Used

  • Agitator Auger and Base Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerWayne from La Grange IL

Top of agitator was loose and would come off.

I removed the nut from the bottom of the old agitator, slipped it off and put the new one on. After tightening the nut it worked just fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 10 people found this instruction helpful

Parts Used

  • Agitator Auger and Base Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerTheresa from Prescott WI

Agitator didn't turn

Took out one screw, set new on in, rescrewed in. Just remember to keep your fabric softner cup. Super easy. We paid for next day delivery, and it arrived by 9:00 a.m. the next day.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-7 of 7