2019693-1-S-Whirlpool-22001664-Timer Knob Insert Cap
2019693-1-S-Whirlpool-22001664-Timer Knob Insert Cap 2019693-2-S-Whirlpool-22001664-Timer Knob Insert Cap http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/55274.gif

Timer Knob Insert Cap

PartSelect Number PS2019693

This part is all white in color and is made of plastic.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will Not Start.
  • Compare At

    $7.45
  • You Save

    $1.24
  • Your Price

    $6.21
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Timer Knob

Part Number 2019688

This part does not come with the top insert cap or the dial skirt.

$15.41
In Stock

Timer Dial Skirt

Part Number 2035480

This timer dial skirt is just over three inches in diameter. It is white in color and is made entirely of plastic. This skirt has a gray indicator triangle.

$14.14
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 14 reviews What's this?
1-5 of 14
 

37 of 45 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerSusan from Hollywood, FL

The plastic knob broke and wouldn't grip the steel movement

All I did was put the three pieces together (1-2-3! So easy) and attached to the metal piece of the dryer. Now I can set the dryer to any temperature and time I need!

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 9 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerJorge from Longwood, FL

Timer knob broke from the middle.

Researched for the part numbers and found the parts needed. In this case the timer knob is made up of 3 separate pieces that easily snap together.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 8 people found this instruction helpful

Parts Used

  • Timer Knob Insert Cap
  • Timer

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerDavid from Mentor, OH

Washer would stop running during the wash cycle

1, Unplug unit from power outlet. 2, Removed 3 screws on the top back control console, 3, pushed bottom section back (standing in front) and tip top section foward, console then will lay flat on top of the washer, 4, remove wire connector, 5, remove 1/4 " screw lower left side, 6, lift locking tap up and slide timer to the left. 7, Set new timer in place and reverse the procedure starting with step 6.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerWayne from Hamilton, MT

Knob retainer hole was broken

Ordered the part..... waited a few days fro it to arrive, (it came quite quick considering). Sat down in my easy chair and assembled the knob and gave it to my wife to slip it on the dryer. Whew, I was beat.... hehe

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerdawn from frisco, CO

Time knob had broken

Removed clip that held timer knob in place, replaced timer know with new one and reinstalled clip. The snapped on the new cap. Took a whole minute to do.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 14