2019504-1-S-Whirlpool-22001299-Tub Cover with Gasket
2019504-1-S-Whirlpool-22001299-Tub Cover with Gasket 2019504-2-S-Whirlpool-22001299-Tub Cover with Gasket

Tub Cover with Gasket

PartSelect Number PS2019504

May not be exactly as shown.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.
  • Compare At

    $78.13
  • You Save

    $13.02
  • Your Price

    $65.11
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Tub Gasket

Part Number 2019331

$22.07
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 2 reviews What's this?
1-2 of 2
 

9 of 12 people found this instruction helpful

Parts Used

  • Tub Cover with Gasket

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Socket set

CustomerWilliam from Ambler PA

Tub cover split and leaking

REMOVED WASHING MACHINE FRONT COVER (2 PHILLIPS SCREWS ON BOTTOM HALF OF PANEL). THEN REMOVED TWO BOLTS THAT HOLD THE TOP IN PLACE. LIFTED HINGED TOP, REMOVED TUB COVER WHICH IS HELD IN PLACE WITH PLASTIC MOUNTING TABS. THAT WAS IT. PUT EVERTHING BACK TOGETHER APPROX. 15 MINUTES.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 8 people found this instruction helpful

Parts Used

  • Tub Cover with Gasket

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerGary from Grosse Pointe Woods MI

Crack on the side of tub cover

Very Easy Repair! Removed 2 screws at the bottom using a philips screw driver(one on each side). Lifted the cover up to detach. 2 screws at the top were removed using a socket set (one on each side). Old tub cover snapped off easily. Make sure you set the cover the same way as the old cover. The new cover snapped on with minimal force. Make sure it's fully seated. Put everything back together in reverse. Took 20min. Most of the time searching for the tools.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2