Timer - 60Hz

PartSelect Number PS2019339

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.
  • Compare At

    $164.53
  • You Save

    $27.42
  • Your Price

    $137.11
In Stock
Order within the next 12 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 3 reviews What's this?
1-3 of 3
 

16 of 17 people found this instruction helpful

Parts Used

  • Timer - 60Hz

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLOREN from BELLEVILLE IL

Washing machine would not go thru wash cycles.

Removed 4 screws on face panel. Popped center out of timer dial, removed clip and spring. Took out two hex screws which freed up the timer mechanism. Pulled out two plugs and installed timer in reverse order, replacing plugs, hex screws and timer dial cap. Replaced front cover on washing machine. Took less than 15 minutes. Dealer wanted $139.00 for the part ( I saved $31.00 purchasing the part from you), $79.00 for the service call and $40.00 labor to install the part. I saved $150.00 by doing it myself. The exploded view picture on your website made it a breeze. Very happy with the result and the savings.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Timer - 60Hz

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerJulie from Lorton VA

Timer was broken

This was the easiest repair ever. I just removed the top 4 screws to take off the face plate, took off 2 nets that attached the timer to the plate, popped off the wiring--then just did everything in reverse to reconnect. Couldn't have been easier.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Timer - 60Hz

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerDavid from Phoenix AZ

Unit would not rinse or spin on several cycles

removed the timer knob, housing cover, retaining screws and wire harness. re-assembled in reverse order. very simple.

Thanks for saving me $40-$60 for service call.

Dave M
Phx, AZ

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3