2019175-1-S-Whirlpool-216201-Rubber Injector Valve
2019175-1-S-Whirlpool-216201-Rubber Injector Valve 2019175-2-S-Whirlpool-216201-Rubber Injector Valve

Rubber Injector Valve

PartSelect Number PS2019175

This part is commonly known to cause a leak at the top left corner of the outer tub. It fits over the injector nozzle.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking water.
  • Compare At

    $9.68
  • You Save

    $1.61
  • Your Price

    $8.07
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Plastic Injector Nozzle

Part Number 2018687

$4.06
In Stock

Injector Sleeve

Part Number 2019020

This is a top mounting style injector sleeve.

$4.06
In Stock

Injector Valve Kit

Part Number 2003241

This kit contains the injector, nozzle and worm clamps. The injector and nozzle are also sold separately.

$15.35
In Stock

Injector Sleeve Bracket - Side Mounting

Part Number 2022105

This injector sleeve bracket is white and made entirely of plastic. This is a side mounting style bracket.

$4.01
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 58 reviews What's this?
 

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Wrench set

CustomerEd from Paoli PA

Leaking washing machine

After reviewing the diagrams and instructions on your site, I unscrewed and removed the cover to the washing machine. I located the source of the leak and replaced the aged parts. I put everything back together and voila, no more leak. Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers

CustomerRichard from Houston TX

Water leaking onto the floor while washer was filling.

By removing the front panel and raising the top panel, I was able to observe that water was overflowing from a small plastic "cup" that was positioned midway along the inlet lines for water entering the washer tub. None of the adjacent parts were visibly damaged or broken, but the rubber ones were soft and "gummy" to some degree. I ordered the three parts that I was able to identify, based on the photos at PartSelect.com. They arrived ahead of schedule and I was able to install them the same day. The only additional disassembly involved disconnecting the hot and cold water lines, removing the water inlet shield and gaining access to the upstream end of the old rubber hose in order to replace it with the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerJon from N.R.H. TX

Water on floor when filling

removed front panel, lifted top of washer and tilted back,pulled black fill hose off clear plastic vent,pulled worn retainer out and put new one in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Injector Valve

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerJonathan from Jacksonville AR

Washer was leaking immediately as it started filling.

I removed the front panel and discovered the general area of the leak. Raised the top and found the injector valve had a hole in it. Removed the injector valve by removing the collar closest to the front of the washer. Searched the internet and found the PartSelect website. To my delight, not only was I able to order the part on a 27 year old washing machine, but there was also a 10 minute video on how to replace the part!! Although my wife was not terribly interested, I kept telling her how cool it was that there was a video showing how to replace this part. I think she was hoping this leak meant a new washing machine. Anyway, part replaced following the directions in the video and the old washer is fully functional again. Thanks for the awesome website!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers, Socket set

CustomerElzo from Kalamazoo MI

Leak coming from underneath washer. Source unknown

Removed front panel ( 2 swrews). Turned off water to washer. Unplugged power cord. Removed two screws holding down top of washer. Located source of leak. It was the injector valve. Removed hose clamps. Removed defective injector valve (2 parts). Installed now injector valve (2 parts) as shown in video. Tightened hose clamps. Replaced top cover and front panel. Done

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Injector Valve

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerAlan from Timonium MD

Injector valve sleeve developed hole over many years.

Repair was a cinch, following this great video: http://www.partselect.com/PS2019175-Whirlpool-216201-Rubber-Injector-Valve.htm?SourceCode=1&SearchTerm=a712&ModelNum=a712#RepairVideo

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Socket set

CustomerRonald from Buford GA

Minor water leakage visible on floor on left side of washing machine.

I opened up the front panel of the washing machine and noticed that water was leaking from a hose along the top left of the machine. I ordered a new plastic injector nozzle and rubber injector valve. The parts arrived in 2 days. Switchout of the parts took less than 5 minutes. Tested it out; the leak was gone. Total cost $22.62. Money well spent!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerRichard from Nashville TN

Water leaking

Followed repair guidance provided on website: 1) Removed front panel of washing machine by removing two phillips-head screws (bottom front of machine) and lifting front panel from bottom. 2)Removed two hex-head from front corners of top panel. 3) lift front panel to gain access to Injector Valve and Nozzle. 4) Removed hose clamp, removed hose, removed old valve and nozzle. 5) Replaced components in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsSocket set

CustomerChris from Atlanta GA

Leaking

First removed front to see approximately where the leak was - left side from the front. Parts arrived quickly. Removed top and swung up to the left side (not the back). Video was very helpful at showing how to replace valve and nozzle. The old valve did indeed have a hole in it and the injection had some perished rubber slime. Closed back up. Hit snag - the top loader door latch was not engaging preventing the machine operating. Hmm. Opened up again and with flashlight located sound of buzzing relay (being careful since the machine was powered) Noticed a wire was caught up in the relay. Disconected power. Re-sited wire and used a twist to hold to other wires to keep it out of the way of the relay. Closed back up. Everything fine. So glad to keep my 24 yr old machine going! Amazing that this was the first time it had ever been moved and opened up. Moving and cleaning was be far the longest part of the whole operation. Great site.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerBill from Jackson NJ

Leaking washing machine

replaced parts

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerJoseph from Flower Mound TX

Water leak

Once I got the washer top off, if was easy to see the water leak and with the parts, very to fix. The parts I ordered where received very quickly. Good service.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Injector Valve

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Socket set, Wrench(Adjustable)

CustomerJohn from Napa CA

Water was leaking from the left side of the washer

I opened up the washer on the front side and then the top side. I pulled out the old rubber injector valve on the left hand side and replaced it with a new one. Simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Injector Valve

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerWalter from Hillsboro NH

Part had a "blowout" with hole to let water leak

My cousin scavaged the same part from his old Maytag. It is like a rubber sleeve going over the plastic injector nozzle.
The new part is to replace the one my cousin gave me. Note:
the new one has a thicker and stiffer rubber wall. Until he repairs his Maytag, I won't know if the new rubber valve model (that is thicker) will let water through it into the washing machine. To repair, used screwdriver to remove screws at bottom front panel. Then used socket wrench to remove the bolts (on front left and right side) of the washer top. This allow the top to be lifted and tilted back towards the control panel; and then get easy access to the rubber injector valve. Screwdriver to remove clamp and install easily. (I found out it was the valve broken by turning on the machine and watching the water squirt into the air). No leak now (using my cousin's old Maytag rubber valve). The value bought was thicker rubber, probably to prevent the same "blowout" that my old Maytag valve had.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerSandra from Norwell MA

Water leaking on the floor during fill, coming from back left corner of machine

The hardest part and most time consuming was opening the machine the first time due to rusty bolts. After using WD-40 to loosen the bolts it was very easy to find the leak. I ordered the parts on Sat. received them on Tues A.M. Including opening the machine again replacing the parts with the new ones and putting it back together, it took less than 30 mins. Please Note: I am a woman and except for the orginal opening when my son helped with the rusty bolts I did this myself. EASY EASY EASY!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLynn from Norwood CO

The washer leaked on the lt side. The injector was wet.

Once the front and top of the machine were opened,
I loosened the clamps on each end of the injector. I removed the rubber injector valve and the plastic injector nozzle was inside. I placed the new nozzle inside the rubber valve making sure the lip of the nozzle was locked in the rubber valve as on the one I had removed. I used a little detergent to lubricate the wider end of the rubber valve(as suggested by someone else in their description). I placed the valve into the washer in the same way the old one came out. I tightened the clamps and started the machine. No leak. I put the top and front on and have been happily washing since. This machine was given to us used by my mother-in-law. It is at least 25 years old.
I assumed we would have to replace the machine, but we repaired it for less than $20., including shipping. Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?