2018639-1-S-Whirlpool-212716-Washer Lid Bumper
2018639-1-S-Whirlpool-212716-Washer Lid Bumper 2018639-2-S-Whirlpool-212716-Washer Lid Bumper

Washer Lid Bumper

PartSelect Number PS2018639

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.
  • Compare At

    $4.97
  • You Save

    $.83
  • Your Price

    $4.14
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 3 reviews What's this?
1-3 of 3
 

1 of 2 people found this instruction helpful

Parts Used

  • Timer
  • Washer Lid Bumper

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerElvis from Meriden CT

The washer would start then shut down. If I pulled the timer switch out, I would pull out and and held with some force everything would function properly.With a

Removed the two screws on top. pulled the panel apart. I disconnected the harness.Removed the timer. Installed the new timer.Connected the harness.Assembled the panel.Installed the screws.I was done. Works as good as new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 30 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

Customereunice from prestonsburg KY

Lid closing to far bumpers missing and fuse block cracked

unhooked power plug removed 2 top screws tilted topfront panel back removed cracked fuse holder replaced with new fuse holder put top cover back on installed 2 top screws plugged in power cord done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Washer Lid Bumper

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerPeter from Pacific Palisades CA

Washing machine lid kept banging shut and rattled when the clothes were being washed.

I was only missing one of the bumpers but that was in pretty poor shape so I replaced them both. It didn't take much to do. Just pressed the bumper into place and Viola! instant gratification.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3