2018477-1-S-Whirlpool-21002238-Control Board
2018477-1-S-Whirlpool-21002238-Control Board 2018477-2-S-Whirlpool-21002238-Control Board

Control Board

PartSelect Number PS2018477

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Compare At

    $197.32
  • You Save

    $32.89
  • Your Price

    $164.43
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 2 reviews What's this?
1-2 of 2
 

15 of 19 people found this instruction helpful

Parts Used

  • Control Board

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAmy from Hamilton IL

My washing machine would not work for more then a few seconds and the power would not stay off. The lights on the knob would flash twice then it would shut off.

First I removed the three screws to take the cover off. I then had to disconnect all the wires from the existing control board and remve the control board. I then installed the new control board and reconnected the wires. I put the cover back on and it works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 8 people found this instruction helpful

Parts Used

  • Control Board

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAllen from Virgie KY

Washer would time our after 30 sec. In any mode

The control board was easy to get to by removing the top 3 screws on the main panel and dropping the front down. The control circuit board was only held in by plastic fasteners, (no screws). All wiring simply unplugged from the circuit board. The entire process of removing the old board and inserting the new one, and reconnecting the wiring plugs was less than 10 minutes. The unit works perfectly now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2