Timer

PartSelect Number PS2018242

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $183.73
  • You Save

    $30.62
  • Your Price

    $153.11
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

4 of 6 people found this instruction helpful

Parts Used

  • Timer

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerGordon from Micco FL

Did not go into spinn cycle

used on-line instructions for replaceing the timer.
Very easy repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

  • Timer

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerFrank from Hillside IL

Washer was not draining at the end of wash or rinse cycle

Always unplug the appliance before starting work!
1) Using a screw driver and nut driver, remove rear access pannel to control pannel.
2) Push nob inward. Pull pin in back of the timer to release nob. Remove nobs.
3) At the back of the timer pull tab at right side of timer. Slide the timer to the right. Remove wiring harnes.
4) Install new timer. Connect wiring harnes.
5) Install nob assembly. Push pin at the rear of timer in until the nob assembly is locked in place.
6) Replace rear access pannel.
7) If the washing machine was moved to get to the access pannel move it back into place and check for leavle.
GOOD TO GO JOE!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2