Fabric Softener Dispenser

PartSelect Number PS2018226

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $33.06
  • You Save

    $5.51
  • Your Price

    $27.55
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Screw with Washer

Part Number 2378290

Sold individually.

$4.54
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 6 reviews What's this?
1-5 of 6
 

67 of 91 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerERIC from DUMONT, NJ

Auger assembly on maytag washer was missing two agitation fins

I ordered the necessary parts which were so easy to find with Model Number of the Washer, ordered parts on a Tuesday and recieved them on a Friday!, wow was I surprised.
I simply removed the softener dispenser, used a socket set to remove single bolt and pulled broken agitator out and installed the new one after replacing the bolt.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 10 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerBARRY from PEACHTREE CITY, GA

Free spinning agitator.

One screw off and pulled the part off. Replaced with new and put screw back in. Fabric softener snapped in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 22 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerGary from Eagle Bend, MN

The fins of the agitator top broke off and the screw was missing.

I decided to replace the entire agitator. The Dispenser, Agitator, and the screw had already come off when it broke. All I had to do was pull/slide the base off the motor. Then I slid the new base in place, slid the agitator on top of the base. I then screwed in the retention screw (which was probably the hardest part due to the small access). After that I snapped on the Softener Dispenser and I was done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 10 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerJoshua from Sugar Land, TX

Agitatir broke, dispenser clogged up.

The fabric softner dispenser just snapped on and the agitator was connected by one screw. Very easy to replace, less than five minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Fabric Softener Dispenser

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerDoreen from Seaford, NY

Dispenser did not come with maching

All I had to do was take off the white cap on top of the spinner, place the dispenser cup in the hole and it was done! It works great even though there was no indication that my model would work with a dispenser. It was the best $3.95 I ever took a chance on!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 6