2018205-1-S-Whirlpool-21001882-Pressure Switch
2018205-1-S-Whirlpool-21001882-Pressure Switch 2018205-2-S-Whirlpool-21001882-Pressure Switch 2018205-3-S-Whirlpool-21001882-Pressure Switch

Pressure Switch

PartSelect Number PS2018205

This part senses how much water is in the tub and allows it to reach the desired level. For example: A little water equals little pressure and a lot of water means more pressure inside the switch.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not stop filling with water.
  • Compare At

    $61.58
  • You Save

    $10.26
  • Your Price

    $51.32
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 2 reviews What's this?
1-2 of 2
 

13 of 24 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerGwen from Chinagrove NC

My dryer was completely dead

I checked this site and determined all of the possible causes. I watched the video when available. I checked prices on a replacement set ($2300.00) if I got what I really wanted but decided to tackle the repairs myself and save $2100.00. My only mistake was becoming distracted when testing the timer resistor before placing my order and not knowing where to connect the replacement. I ended up paying for assistance online ($24.00). It was much cheaper then replacing my washer and dryer or even calling a service person out for help. I applaud the services offered at this site and would recommend it to friends and family.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 8 people found this instruction helpful

Parts Used

  • Pressure Switch

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerRobert from Framingham MA

Overfilling causing flooding

Unplug from power Source,turn off water supply,Remove 3 screws that hold the Control Panel in Place.Remove knob, lower assembly, unplug wire Connector,using pliers , compress vacuum hose clamp,remove vacuum hose,remove screw holding switch in place,depress plastic tab that prevents movement,twist switch assembly to remove.Reverse procedure to install new switch.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2