2018203-1-S-Whirlpool-21001878-Agitator Auger and Post Assembly
2018203-1-S-Whirlpool-21001878-Agitator Auger and Post Assembly 2018203-2-S-Whirlpool-21001878-Agitator Auger and Post Assembly 2018203-3-S-Whirlpool-21001878-Agitator Auger and Post Assembly http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/58725.gif

Agitator Auger and Post Assembly

PartSelect Number PS2018203

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not agitate.
  • Compare At

    $78.32
  • You Save

    $13.05
  • Your Price

    $65.27
On Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 13 reviews What's this?
1-5 of 13
 

83 of 159 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerPATRICIA from NEW CARLISLE, OH

Agitator wouldn't turn

Not sure, my husband did the repair but said it wa real easy and if he can do it anyone can, lol

Help other customers find the most helpful instructions.

Were these instructions helpful?

39 of 55 people found this instruction helpful

Parts Used

  • Agitator Auger and Post Assembly

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerDonna from Borger, TX

The agitator auger was broke.

All i did was remove the screw, took off broken agitator auger and replaced it with the new one and put the screw back in and was done in about 5 mintues. Super easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

21 of 31 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerDara from Demarest, NJ

Agitator kept coming off during spin cycle

After using my existing parts for about 6 months, and constantly having to tighten the bolt, I though that the parts might be stripped. It took one minute to unscrew the bolt that holds the two parts of the agitator together with a socket and 10" extension. After taking those parts off, it took another minute to put the pieces back and screw the new bolt back in place. Extremely easy - and much less expensive then having a repairman come out to fix it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

17 of 19 people found this instruction helpful

Parts Used

  • Agitator Auger and Post Assembly

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerGeorge from Warwick, NY

Auger would not stay attached to assembly

Removed laundry softener dispenser, removed bolt with socket wrench and long extension, pulled off old assembly piece, installed new assembly and replaced bolt. It took longer to order the part than to replace it!

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 11 people found this instruction helpful

Parts Used

  • Agitator Auger and Post Assembly

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerDAOSADET from WASHINGTON, DC

The agitator came off

use the socket with a 10 inch extention remove the existing screw. place the new agitator and screw back. remove the softner container from the broken agitator and snap it to the new one. job done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 13