17 of 25 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
CustomerDara from Demarest NJ
Agitator kept coming off during spin cycle
After using my existing parts for about 6 months, and constantly having to tighten the bolt, I though that the parts might be stripped. It took one minute to unscrew the bolt that holds the two parts of the agitator together with a socket and 10" extension. After taking those parts off, it took another minute to put the pieces back and screw the new bolt back in place. Extremely easy - and much less expensive then having a repairman come out to fix it.
7 of 17 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:15 - 30 mins
CustomerGary from Eagle Bend MN
The fins of the agitator top broke off and the screw was missing.
I decided to replace the entire agitator. The Dispenser, Agitator, and the screw had already come off when it broke. All I had to do was pull/slide the base off the motor. Then I slid the new base in place, slid the agitator on top of the base. I then screwed in the retention screw (which was probably the hardest part due to the small access). After that I snapped on the Softener Dispenser and I was done.