| |
7 of 9 people found this instruction helpful
Parts Used
-
- Icemaker Auger and Crusher Blade Assembly
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerJames from Robinson TX
Ice dispenser had jammed up and become inoperative
The parts discription was a bit vague and I wasn't sure exactly what I was ordering, but I received everything I needed and it works fine. The combination screw conveyor/ice crusher came in one piece. The ice cube bin is a plastic assembly that snaps apart. I used a wide blade screw driver carefully to facilitate assembly/disassembly. Once you have it apart the old converyor slips out and the new one slides in. Do not remove the two screws that hold the new assembly together. You need a phillips scredriver to take out two of the screws from the old assembly and put in the new one. That is, there are four screws and you need to trasfer two of them. Everything now works fine.
|
6 of 8 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerCharles from Plano TX
The crushed ice agitator kept slipping out of the bracket.
With the repair parts ordered and received from PartsSelect.com, I was able to install a new Ice Bucket and the crushed ice agitator assembly. This simple repair has the refrigerator dispencing ice like new.
|
3 of 3 people found this instruction helpful
Parts Used
-
- Icemaker Auger and Crusher Blade Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerDonna from The Villages FL
The icemaker assebly would go off track
I removed the front cover--just popped off with no trouble. Removed 2 screws at the bottom. Slid the broken part out and put the new one in place. Put in the two screws, replaced the fron cover AND Done!!!
BTW I am a 65 year old woman and the icemaker is like new.
|
2 of 2 people found this instruction helpful
Parts Used
-
- Icemaker Auger and Crusher Blade Assembly
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerRon from Deerfield IL
Fridge missing agitator assembly and ice bucket.
While ordering the assembly, I had thought that the ice bucket was included but it wasn't. So I ordered the ice bucket afterwards. Maybe a little more clarity as far as what parts come in the whole assembly would save some time. All in all, the agitator was very easy to install, along with the ice bucket. After securing the agitator to the existing assembly with two screws, the ice bucket slipped right into place. Easy to install.
|
1 of 2 people found this instruction helpful
Parts Used
-
- Icemaker Auger and Crusher Blade Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsSocket set
CustomerMarshall from Marrero LA
Ice maker auger
Wow! less Than 15 mins to install, called partSelect and within two days the Auger arrived and with handy socket it was done!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsSocket set
CustomerRobert from IndianHead Park IL
Ice auger not working
Removed two screws on original ice bucket auger front panel-removed old ice auger assembly from old ice bucket and installed new auger assembly in new ice basket.Replaced ice auger/bucket front panel with the two screws and we now have a working ice dispensing unit and uncracked ice bucket
|
1 of 2 people found this instruction helpful
Parts Used
-
- Icemaker Auger and Crusher Blade Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerHoward from Montoursville PA
Ice would not come through door, troubleshot and determined bale mechanism wasn't turning properly.
Removed old agitator unit - 4 nut-head screws removed, and installed new agitator and screws aligned easily.
|
2 of 6 people found this instruction helpful
Parts Used
-
- Icemaker Auger and Crusher Blade Assembly
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerRobert from Bakersfield CA
The ice crusher quit working
Removed the old one put in a new one, fairly simple. Would have been much easier if I had called the manufacturer first then ordered the part. The first part I ordered was the ice bucket, I thought I was getting the crusher mechanism, but it turned out to be the bucket only. When I finally got the right part it was really easy. I went ahead and kept the new bucket anyway.
|
1 of 4 people found this instruction helpful
Parts Used
-
- Ice Bucket
- Icemaker Auger and Crusher Blade Assembly
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerMichael from Madison AL
Auger not dispensing ice, motor working properly
Firts checked the parts received werer correct for the repair and the correct part numbers ordered. Then removed the ice bucket with the auger in bottom. Emptied ice from original bucket auger assembly. Checked out the removeal of the face cover for the bucket auger and removed it from clips that held it in place. Checked the specifications of the old ice bucket compaired to the new parts. Installed the aurger assembly into the new ice bucket and removed the two screws from the old unit to use in secure the auger assembly in the new bucket. The only tool needed was a 1/4 inch nut driver. Installed the face place on the new ice bucket auger assembly and tested the fit in the freezer. Ran test of the auger assembly without ice to ck for any misinstlled parts. Refilled the ice bucket with ice and tested with ice to complete the repair.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Icemaker Auger and Crusher Blade Assembly
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerSherry from Terrell TX
Arm to distribute ice quit working
removed the old part and replaced with new. Part came very quickly....
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerGary from Flippin AR
Crushed ice agitator assy making loud noise
removed the old one and installed the new one.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Ice Maker
- Icemaker Auger and Crusher Blade Assembly
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerAkyra from San Jose CA
Water leaking into icebox creating solid mass of ice. No ice crushing
I replaced the ice maker assembly easily by removing the power cord and unscrewing 3 screws. Connected the power harness to the new ice maker and placed into the fridge. I then disassembled the ice agitator assembly and replaced with the new parts. All it took undoing the two bottom front (small screws).
|
19 of 618 people found this instruction helpful
Parts Used
-
- Ice Bucket
- Icemaker Auger and Crusher Blade Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerCarol S. from Quincy IL
The auger was bent away from the cap and ice bucket was cracked
i had a serviceman look at it and he said it needed 6 parts, so i went to parts select and found the parts that i needed and i only needed 2 parts, the icemaker auger assembly and the ice bucket. It is working just like new again!!! thank you parts select, order on one day and recieved it the next day now thats what i call very fast service and shipping. If i should ever need parts for anything else parts select is the place i will go to. thank you again
carol
quincy il
|