2007702-1-S-Whirlpool-12550111Q-Fresh Food Door Gasket
2007702-1-S-Whirlpool-12550111Q-Fresh Food Door Gasket 2007702-2-S-Whirlpool-12550111Q-Fresh Food Door Gasket 2007702-3-S-Whirlpool-12550111Q-Fresh Food Door Gasket http://www.partselect.com/Schematics/Maytag/31667.gif

Fresh Food Door Gasket

PartSelect Number PS2007702

This white fresh food door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door Sweating.
  • Fridge runs too long.
  • Fridge too warm.
  • Leaking.
  • Compare At

    $121.12
  • You Save

    $20.19
  • Your Price

    $100.93
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Fresh Food Door Gasket

Part Number 2007716

This black door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

$99.61
Special Order

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 17 reviews What's this?
 

8 of 9 people found this instruction helpful

Parts Used:
  • Fresh Food Door Gasket
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: WILLIAM from VERONA, WI

Gasket was damaged

I removed everything from the door, and unscrewed all of the nuts. I left the door on the refrigerator, mainly because I didn't think I needed to remove it. The gasket can be put on with the door attached, but I can see where it would be easier to take the whole door off. It would be easier to position the gasket laying down. All in all, the repair went fine and the door seals much better.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 8 people found this instruction helpful

Parts Used:
  • Fresh Food Door Gasket
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Socket set
Customer: Ralph from Lexington, MA

The gasket was deformed and did not fit properly.

1. I removed all screws holding the old gasket.

2. I removed the old gasket.

3. I removed and unfolded the new gasket from the shipping package.

4. I used a hair dryer to heat and straighten the gasket.

5. I installed the new gasket and secured it with the screws.

6. Some gasket deformation still remained, so I used the hair dryer again the next day to heat the gasket. Adding a small piece of cardboard behind
the gasket also helped to restore the gasket shape.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used:
  • Fresh Food Door Gasket
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Debra from Newnan, GA

Seal was balling up at bottom of doors and frig was not shutting

First placed the gasket in warm water so it would easily stretch over the door. Took off the inside front door cover and placed gasket on (magnet side out) then placed gasket on door and reattached. Works great and your prices and time of delivery were wonderful. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Judy from Montpelier, IN

Could not get seal under face plate

Ended up taking the inner face plate off, putting gasket around it and then repaced to ref/freezer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used:
  • Fresh Food Door Gasket
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Guillermo from Brecksville, OH

Replace old door gasket

Star at the the right hand corner of door, loosen the screws, pull the old gasket out and at the same point push the new gasket,, tight all the screws
chek for any air leaks ...problem solved.

Help other customers find the most helpful instructions.

Were these instructions helpful?