2007696-1-S-Whirlpool-12550108Q-Fresh Food Door Gasket
2007696-1-S-Whirlpool-12550108Q-Fresh Food Door Gasket 2007696-2-S-Whirlpool-12550108Q-Fresh Food Door Gasket 2007696-3-S-Whirlpool-12550108Q-Fresh Food Door Gasket

Fresh Food Door Gasket

PartSelect Number PS2007696

This black door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door Sweating.
  • Compare At

  • You Save

  • Your Price

In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Freezer Door Gasket

Part Number 2007684

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.0 / 5.0, 2 reviews What's this?
1-2 of 2

11 of 15 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours


CustomerGerard from Rutland VT

Air leaking due to failed seals

First unload the doors, and remove each door from the fridge and freezer. I placed the doors on the counter island and removed all the screws from around the perimiter with the battery drill. Lots of screws. The freezer door had some Ice accumulated in the insulation inside the door. I salvaged as much of the dry fiberglass and tossed the wet stuff. I cut some strips of fiberglass from a roll of 3.5" I had to replace the tossed insulation. The door seal installation went smoothly and the door rehanging was easy also.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Fresh Food Door Gasket

Level of DifficultyEasy

Time to do repair:30 - 60 mins


CustomerDavid from Baraboo WI

Old gasket was deteriorating

I was able to lay the gasket out flat for about a week. Then installed after removing the old one and the inner part of the door. Getting the small flap that goes behind the edge of the inner door and keeping it in place while reinserting the screws around the edge was the most difficult. It might have been easier wit a magnetic nut driver to start the screws as it was difficult to start the screws when they kept falling.
The gasket fit great and it is a good do it yourself project that will save a lot of money

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2