2006539-1-S-Whirlpool-12313702-Chiller Frame Assembly
2006539-1-S-Whirlpool-12313702-Chiller Frame Assembly 2006539-2-S-Whirlpool-12313702-Chiller Frame Assembly 2006539-3-S-Whirlpool-12313702-Chiller Frame Assembly

Chiller Frame Assembly

PartSelect Number PS2006539

Door for the chiller frame is sold separately.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $64.97
  • You Save

    $10.83
  • Your Price

    $54.14
In Stock
Order within the next 6 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 2 reviews What's this?
1-2 of 2
 

3 of 3 people found this instruction helpful

Parts Used

  • Chiller Frame Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSusan from Freehold NJ

Broken hinge button on chiller frame

While this was merely a replacment part that took 2 minutes to reinstall, I was VERY impressed in that I received the part the day after ordering. Many thanks for your speedy delivery!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Chiller Frame Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerTony from Denver PA

Chiller door replacement [milk cabinet]

The chiller door frame is easy to install. Simply remove the egg holder, gently pry the door off [if the tabs on the old one haven't broken off yet] by gently prying the door sides where it mounts to the frame tabs. The door will then slide out. Lift the chiller door frame up then slide it towards you. when putting the new chiller door frame back in place just line up the two [2] front alignment pins on the chiller door frame [one on each side of the chiller door frame in the front] with the holes in the front of the chiller drawer basin. Slide the new frame back and down in to place. Next, carefully adjust the freezer air flow register to the desired temperature [it's best to do this with a thermometer and take your time since the temperatures change slowly depending on how long the freezer side runs]. To change the desired height for installing the new chiller door frame remove the chiller door frame as stated above [you do not have to remove the chiller door to change the chiller assembly height] then lift up and slide out the the chiller drawer basin. Remember, there's holes on the side of the frame where the cold air from the freezer can enter the chiller - make sure one of these holes lines up with the opening from the freezer. When you have the desired slide the chiller drawer basin back and down on the slots in the refrigerator door. Next line up the two [2] front alignment pins on the chiller door frame [one on each side of the chiller door frame in the front] with the holes in the front of the chiller drawer basin. Slide the new frame back and down in to place. Next, carefully adjust the freezer air flow register to the desired temperature [it's best to do this with a thermometer and take your time since the temperatures change slowly depending on how long the freezer side runs]. I keep mine at 34`F so the milk keeps a long time yet doesn't freeze.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2