| |
14 of 15 people found this instruction helpful
Parts Used
Level of DifficultyDifficult
Time to do repair:Less than 15 mins
Tools
CustomerPearl from Eagle Lake TX
These knobs did not fit.
These knobs did not fit. I needed the ones that have the D inside.
|
4 of 6 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJohn from Austin TX
Range top was worn and dirty
opened shipping boxes, unpacked, unplugged old units, knobs and filter, repacked old units into boxes, plugged new units in, total time less than five minutes.
Looks and works like a new unit.
|
3 of 5 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDonna from Charlotte NC
Cooktop was looking old and worn though there was no working problem.
All of the "old" pieces were very easily removed and replaced with the new pieces. The update looks terrific and works just fine!
|
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRegina C from Oakland MD
I broke my knobs off with cast iron skillet, old knobs needed replaced.
I removed the old knobs and replaced with the new ones. We also replaced one of the switches which the knobs fit on, because I broke the switch off with a Cast iron skillet.
|
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:1- 2 hours
ToolsScrew drivers
CustomerEdward from New Hartford NY
Surface unit infinite switch needed replaced. The knobs and lens were cosmetic.
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires and replaced the connections in sequence. It was easy. BUT, be sure the circuit breaker is disconnected if you want to enjoy the fruits of your labor. I figure I saved about $1100 by not having to buy a new stove top and I now have an almost new one. The cook appreciates it too.
|
3 of 5 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerVal from Suwanee GA
The knobs were stripped and we could not turn 2 of the burners on.
I used pliers to remove old knobs and just inserted the new ones. I had tried using cheap generic knobs that did not work.
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerShirlely from Citrus Heights CA
Broken burner knob
removed all for knobs and replced with new ones
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJacqueline from Bristol RI
Old
I lifted off the old knobs, pushed on the new. Easy and the cooktop looks brand new!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJANE from BALTIMORE MD
No problem...just wanted a fresh look
our cook top is so old, but no need to replace just yet. so I ordered new knobs to get a new look
thank you!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerVirginia from Bothell WA
Cleaners lost knob.
I pulled off the other 3 old knobs. Pushed on the new ones, which pushed on hard, but work. They stick out farther than the originals. They look a little different, but only to me. No one else would notice.
The main part is, it works. A little spenty for my taste, but did not know where else to go and they arrived very quick.
|
2 of 5 people found this instruction helpful
Parts Used
Level of DifficultyVery Difficult
Time to do repair:Less than 15 mins
Tools
CustomerJames from Devon PA
Hmm, let's see, knob didn't match all my other new knobs
Oh this was a toughie and I was sweating it out.
With a delicate touch I removed the old knob and pushed on the new knob, 5 seconds
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerBruce from Boca Raton FL
Numbers worn on old knobs
replaced old worn silver and white control knobs with new black ones.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJery from Knoxville TN
The control knobs had been damaged by heat
Easily removed the old knobs and applied the new ones.
|