2003656-1-S-Whirlpool-12002218-Front Bowl Tine with Sleeves
2003656-1-S-Whirlpool-12002218-Front Bowl Tine with Sleeves 2003656-2-S-Whirlpool-12002218-Front Bowl Tine with Sleeves

Front Bowl Tine with Sleeves

PartSelect Number PS2003656

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $28.18
  • You Save

    $4.70
  • Your Price

    $23.48
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Rear Bowl Tine

Part Number 1878632

$21.41
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 8 reviews What's this?
1-8 of 8
 

7 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerSamantha from Sugar Land TX

Both items were broken

Inserting the front bowl tine was simple though I put it in backwards before realizing it was incorrect. In order to replace the handle, the dishwasher door had to be taken apart with a star-head drill bit. It wasn't difficult, but knowing what tools were necessary would have been helpful along with instructions.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

  • Front Bowl Tine with Sleeves

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerJill from Salinas CA

The part that holds extra dishes had just worn out

My handy husband was able to take it apart easy, and then your online site was great at showing us exactly which parts were needed to replace. Then a few mintues to put the 4 pieces together and now I've got all the room I need for the extra dishes!!The whole experience was so easy and very helpful!! thank-you very much!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDonald from Rockford MI

Front & rear bowl tines were damaged an unusable

removed old damaged tines and snapped new tines into place. Saved myself some cash, received the product in less then 5 days and did not have to drive over to the appliance store in the next town and wait two weeks for them to place the order and at a substantial savings. I'll use your service again when needed.

Donald R. Daily Sr.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Front Bowl Tine with Sleeves

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKris from Verona WI

Rusted out rack needed to be replaced

Repair was really quick and simple. Found the part online easily with the information on the website I was confident it would be the right part. Recieved the part in 2 days and snapped it into place. Very satisified!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers

CustomerJulie from Bedford TX

Lower dishwasher rack replacement

Purchased a replacement lower rack WPL 99002572 (which had the wheels but not sure that it still does.) Used the old fold down shelf but this might be available as a part. The rack didn't have the tines near the rear of the rack on either side--my old one had fixed/welded tines so I didn't expect this and needed replacement parts to fix it. I Ordered 4 straight clips AP4112831 (99001436)CLIP, FOLD AWAY TINE to hold the tines. There weren't any recommended tines, so found and Ordered 2 each Front place and Rear Bowl tines WPL 12002218 x 2 and WPL 99002138 x 2 that looked about the right length. Used them in pairs. On one side of the rack (right side), only the bowl configuration works--this is because the tines catch on the edge of the basket and won't fold straight up. On the other side (left), I can switch between bowl or straight tines by folding them different ways. To make this work,clip the tines to the basket so the tines set a little closer to the center of the basket than you might expect, in order to allow the tines to 'float' enough to rotate to the opposite configuration. I had to experiment with the clip location so needed a needle nose pliers to gently unlatch the clips so that I didn't break them. I also ordered a clip AP4113042 (99001746)Latch, pivoting tines--but didn't use them with these bowl tines. They might be useful with a straight tine for latching the top to the outside of the basket.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Front Bowl Tine with Sleeves

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCharles from Herndon VA

Broken original front tine on lower basket

The part snapped in quickly and easily.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Front Bowl Tine with Sleeves

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAllan from Rochester MN

Tine had rusted and broken off

snapped out broken tine bracket and replaced. All without tools. About 2 minutes to do whole job. Right part, right price, the first time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJoel from New Rochelle NY

Replacing 2 parts, one of which had broken, needed replacing

Both parts were easily replaced without the use of any tools. Just slipped into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-8 of 8