Quick Question!

Have you ever purchased from PartSelect.com before?

2003515-1-S-Whirlpool-12002039-Motor and Control Board Conversion Kit
2003515-1-S-Whirlpool-12002039-Motor and Control Board Conversion Kit 2003515-2-S-Whirlpool-12002039-Motor and Control Board Conversion Kit 2003515-3-S-Whirlpool-12002039-Motor and Control Board Conversion Kit http://www.partselect.com/Schematics/Maytag/CW23-04.gif

Motor and Control Board Conversion Kit

PartSelect Number PS2003515

This motor conversion kit comes with a variable speed high speed induction motor, a motor control board and a wiring harness. The motor control is NOT available separately.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Pumps but will not spin.

Compare At

$397.33

You Save

$66.22

Your Price

$331.11
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 6 reviews What's this?
1-6 of 6
 

54 of 75 people found this instruction helpful

Parts Used:
  • Motor and Control Board Conversion Kit
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Socket set, Wrench set
Customer: Allan from Beavercreek, OH

Motor would not spin or cycle

Followed the inclose instructions that came with the Motor and Control Board Conversion Kit very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

18 of 28 people found this instruction helpful

Parts Used:
  • Motor and Control Board Conversion Kit
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers, Wrench set
Customer: Bick from Alameda, CA

The problem is the motor

first i follow the instruction come with parts in box...and replace easy this the best place to buy parts for all home appliance...thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

15 of 22 people found this instruction helpful

Parts Used:
  • Motor and Control Board Conversion Kit
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Wrench set
Customer: William from Colver, PA

Lr code on the display, washer would not spin.

Removed the front panel and took out the old control board, which had a burnt spot on it. Removed back panel and took out the old motor. Put in the new motor and then the new control panel. Runs perfect.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 16 people found this instruction helpful

Parts Used:
  • Motor and Control Board Conversion Kit
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Vicente from Newnan, GA

Motor won't run.

Followed the troubleshooting procedure that came with the
washer.Found problem,(with a little help from my experience
in electronics). Order motor and control board kit.
Followed the easy instructions that came with parts and
had it working in no time!!!!
Good job PartSelect !!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 11 people found this instruction helpful

Parts Used:
  • Motor and Control Board Conversion Kit
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers, Socket set
Customer: Roy from Painesville, OH

Motor/board , ran erraticly-stopped midstream

Had to move all the concoctions my wife uses on my greasy work clothes [ purple power, dawn dishwash soap,lestoil, etc..] Removed front , removed back panel..Replaced board then motor..Replaced belt while I was in there.I had already changed out the tub bearing assembly earlier..Quite a complex machine when you get in that deep..Runs like new...

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 13 people found this instruction helpful

Parts Used:
  • Motor and Control Board Conversion Kit
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: Robert A. from Warwick, NY

Motor had an open in winding

1) Removed machine front by removing four (4) screws. 2) Removed rear access panel. 3) Replaced antiquated motor controller with upgade revision; basically unplug and plug 4) replaced motor and 5) closed up unit. Whole job took about an hour with half the time spent moving the unit to work oo.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-6 of 6