2003478-1-S-Whirlpool-12001991-Ice Dispenser Solenoid and Door Kit
2003478-1-S-Whirlpool-12001991-Ice Dispenser Solenoid and Door Kit 2003478-2-S-Whirlpool-12001991-Ice Dispenser Solenoid and Door Kit 2003478-3-S-Whirlpool-12001991-Ice Dispenser Solenoid and Door Kit http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/51834.gif

Ice Dispenser Solenoid and Door Kit

PartSelect Number PS2003478

In addition to the solenoid (115V), this kit also comes with a door strike and an ice door assembly. Please be advised the spring and roll pin are not included with this kit.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Ice maker won’t dispense ice.
  • Not dispensing water.
  • Leaking.
  • Ice maker not making ice.
  • Door Sweating.
  • Door won’t open or close.
  • Noisy.
  • Compare At

    $78.98
  • You Save

    $13.16
  • Your Price

    $65.82
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Ice Chute Door Return Spring

Part Number 2059882

Sold Individually.

Order within the next 7 hrs and your part ships today!
$6.21
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 73 reviews What's this?
 

3 of 5 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

Tools

Customeralfonso from palmetto bay, FL

Ice was forming at the door because leaking warm air.

I just follow the easy instructions on the video provided for the part in question. Easy to change and everything is working fine

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsScrew drivers

CustomerTerrance from Great Falls, VA

Ice dispenser would not work

Our Refirgerator had custome wood covering to match the cabinets. Be sure to take the covering off first. There are four screws on the left edge fram that need to be removed and two on top of the tpe edge frame. The panels then slide right off. Remove the spill tray and unscew the two screws at the bottom. Slide up the key pad and there are three screws behind the key pad that have to come out. There are two "plug in connections that have to be disconnected to lift the dispenser unit out. Take care not to damage or separate the connector wire from the keypad and the circuitboard.

The new solenoid and flapper assembly is different than the original. My guess is the orginal design was part of the problem and the redesign allows the solenoid to work better. I was suprised the new assembly did not come with a tension spring... SO be careful and DO NOT loose the tension spring from the old assembly. there are two screws that hold the olde solenoid in plae wonce you remove the flapper and tension spring. Put the new solenoid in, hold the tapper out and put the flapper assembly in. Rotate the flapper rod until you can seat the solenoid tapper. Replace the tension Spring and then reassemble as in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerCraig from Fenton, MO

Ice was jamming in delivery chute

The round sealing door of the ice chute had to be replaced a alignment tab broke off the side.
1) unplugged the appliance from its receptacle.
2) removed catch tray at bottom of ice water depenser exposing two screws.
3) removed screws and slid cover up and away from keyed studs.
4) unplugged ribben cable from front panel.
5) removed additional screws and lifted the chute door and solenoid assemble.
6) replaced components and reassembled in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 6 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerBeth from Naples, FL

My actuator pad was not working consistently and my ice was not dispensing. I had ice forming inside the freezer door where the ice drops down, as well as from the ice maker itself.

I called and described my problem to a local refrigerator repairman and he told me what the problem sounded like. After ordering what I thought to be the correct parts, I just followed the video provided by PartSelect, which made it quite simple. I have purchased parts from this company in the past and made repairs which have saved me a considerable amount. This is a terrific company for us single women!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerEd from Clinton, MS

Ice door was broken

I reviewed the instructions which were very clear and began. I removed the catch tray to access the two screws. I removed those and lifted the front off. I then removed the three screws holding the dispenser unit and gently pulled the unit out. I then disconnected the two electric connnections and removed the dispenser unit from the refrigerator. The ice door tab was broken, so I really just needed to replace the door, but since I received the other new parts in the kit, I went ahead and replaced those as well. The directions were very specific, just make sure that the spring is inserted correctly. I then reinstalled the unit. When I finished, I tried it but the door would not shut properly. I disassembled the unit again and found that the spring had come loose. Looking back , I probably knocked it loose when I was installing the water tube back into place. I reassembled, making sure that the spring was installed correctly, and everything worked fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?