2003478-1-M-Whirlpool-12001991-Ice-Dispenser-Solenoid-and-Door-Kit.jpg
2003478-1-S-Whirlpool-12001991-Ice-Dispenser-Solenoid-and-Door-Kit.jpg 2003478-2-S-Whirlpool-12001991-Ice-Dispenser-Solenoid-and-Door-Kit.jpg 2003478-3-S-Whirlpool-12001991-Ice-Dispenser-Solenoid-and-Door-Kit.jpg

Ice Dispenser Solenoid and Door Kit

PartSelect Number PS2003478

In addition to the solenoid (115V), this kit also comes with a door strike and an ice door assembly. Please be advised the spring and roll pin are not included with this kit.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Water dispenser will not dispense water.
  • Ice maker won’t dispense ice.
  • Leaking water.
  • Ice maker will not make ice.
  • Door sweats inside or outside.
  • Door won’t open or close.
  • Unusual Noise.
  • Compare At

    $77.42
  • You Save

    $12.90
  • Your Price

    $64.52
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Ice Chute Door Return Spring

Part Number 2059882

Sold Individually.

$3.71
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 73 reviews What's this?
61-73 of 73
 

0 of 1 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerRoland from Vallejo CA

Ice door broken

Followed instruction provided. Ice door only part required.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Roll Pin
  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerMerle from Houston TX

Ice maker chute door broke off

Easy to install and it works fine. Recommend using the instruction manual and it was a breeze

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers

CustomerKaylyn from Middletown DE

Door wouldn't open to dispense ice cubes

Easy to follow directions. Got to the part where the old solenoid would be removed and found that one of the two wires the connected to the old solennoid had become disconnected. Reconnected and everything works. Will keep the kit now as backup and instructions in case I need to repair again. Very satisified.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerKevin from Mukilteo WA

Fountain broken

Fried the new circuit board, dead short somewhere.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMartha from San Antonio TX

On the door ice maker stopped working

Removed the front panel and all associated parts from the water and ice on the door.

My husband had taken everything apart and was ready to order a whole new panel. After reading some of the stories on the website of people having the same problem (no ice would come out, water would come out & not stop or splatter everywhere) we decided to start with the part everyone seemed to have ordered. After ordering the part, it arrived faster than I expected, and solved the problem. It helped reading the other stories so we knew what kind of tools were needed and other helpful hints. I have already recommented partselect.com to my sister in law to help with a dishwasher repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Wrench set

CustomerArt from Scottsdale AZ

Dispensing closing flap broke off

Ice Dispense Repair on front door:
Just followed the directions to remove that front panel, removed the screws, as needed, to take out the unit. The new parts installed easily, in fact, much easier than I thought it would be. Just re-assembled unit and was back in business...

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers, Socket set

CustomerStanley from Houston TX

Plastic flapper broke

Replaced flapper, and solenoid per the instructions. It was much easier than I had anticipated. The hardest part was reconnecting the control wire to the front panel. Not much room to get your hands in there, but it finally went together...

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJamieson from Spring TX

Ice door tab broke off

The parts just arrived -- wow, I think I've found my favorite parts supplier!!!

Ironically, I had jury rigged a new tab on the ice door by inserting a screw into where the tab snapped off, but it didn't work! As I was taking it apart this time, I realized that the solenoid spring had become unclipped. However, it's nice to have it all back together again and working with new parts!

Thank you -- great packaging, the parts look fantastic, and a great sheet of instructions! I've already repaired my refrigerator (only took about ten minutes) and it's up and running!

Thank you!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDarryl from Corbin KY

Ice dispenser door replacement

My part was received in only 3 days. It was exactly what I need. The directions sent with the ice door were really simple to follow. Within 30 minutes my family was back to getting ice from the refridgerator door. Nobody wants anything to tear up, but I hope if I do have troubles in the future, it's something that partselect carries parts for. These days it's hard to find a business that gives you want you want, quickly, for a fair price. If you were a movie I would give you two thumbs up. Thanks for making this a good outcome and not just another headache!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

Customerlonnie from savannah MO

Fountain door broke

The repair was easy following the instructions provided with repai kit. pictures were a little blurry but other wise very helpful.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsWrench set

CustomerElaine from Apopka FL

Ice would not dispense & at times would not stop dispensing.

First, I took everything apart and replaced only the ice door. Everything worked fine for about an hour and the door started opening and closing on its own. I took it apart again and replaced the whole kit including the solenoid. Everything was fine for less than an hour and then the door started opening and closing again. I took it apart and made sure everything was tightened carefully. Now it works perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBrandon from Gilbert AZ

The original door flap broke

The replacements parts were aftermarket parts so I could not simply replace the one piece I needed. I did replace all the original parts with the aftermarket parts and it works perfectly. I wish the design was closer to the original, but it is just as functional. The only problem I ran into was the images on the instruction sheet were difficult to see. The text however did an exceptional job of explaining each step.

Help other customers find the most helpful instructions.

Were these instructions helpful?

20 of 646 people found this instruction helpful

Parts Used

  • Ice Dispenser Solenoid and Door Kit

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerCHARLES from PARSONS TN

The flap holding the ice back broke

First I cut the power to the refrigerator. Followed the instructions for removing the door panel. Disconnected the electrical panel to the door controls. replaced the flap only and reassembled. Hate I had to by the solenoid when all I needed was the flap. Ordered the part and had it the next day, very fast shipping. I have used PartSelect for other appliance parts and had good service from them.

Help other customers find the most helpful instructions.

Were these instructions helpful?

61-73 of 73