Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Garth A - March 23, 2020
Verified Purchase
Lid switch repair
My Maytag washer quit operating and I isolated the problem to the lid switch. I ordered the switch only which came in 3 days, I installed it and found the plastic pin on the housing was broken so the switch would not stay in place. I called PartsSelect and ordered the entire assembly and shipped the switch back for a full credit. The washer is back up and running.
★★★★★
★★★★★
Donald C - June 12, 2019
Verified Purchase
Easy install, fast repair
After 15 years of use the metal lever for the proximity switch weakened due to metal fatigue, The replacement of the switch took about 5 minutes (total repair time less than 30 minutes) as you just had to remove the panels and 2 screws and reroute the cable assembly.
★★★★★
★★★★★
Brian C - August 29, 2018
Verified Purchase
easy
Easy repair and worked out great. Saved me 1000 dollars
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Adrienne
April 22, 2018
How can I open the cover to replace this part?
For model number LSG7806AAE
Hi Adrienne,
Thank you for your question. We do not have any information for this part specifically however here is a general video that will show you how to remove the top: https://youtu.be/zFTUxHgxlFs . It is generally very similar to take off the tops of most top load washers. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Eric
August 14, 2019
Washer started to fill then stopped
After being opened and won’t restart
Dryer works
Rinse cycle works
Water doesn’t start filling when start job pulled out
For model number LSG7806AAE
Hello Eric, thank you for contacting us. This could be due to either a faulty Timer part number PS11739312 or Water Inlet Valve part number PS11739275 for your model. I hope this helps and good luck with your repair!
Was this helpful?
Thank you for voting!
Robert
December 19, 2022
The washer fills and then turns off before agitation starts. It will not rinse and will not spin either. The water will not drain. What do you think might be the problem?
For model number LSE7804ACE
Hello Robert, thank you for your inquiry. We have researched your model and would recommend checking the following parts to fix your issue: door catch kit, part number PS2162263, lid switch, part number PS11738787, door switch, part number PS1964648, and dryer timer, part number PS11741041. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
This is a very old Whirlpool dryer and it began to overheat, shutoff, and had black smoke coming from the back of the dryer towards the top. I was not sure if it was an electrical fire or the heating element. I took most of the sides off of the dryer and removed the heating element. I blew off all the old lint throughout the dryer. I also tested both the heating element (reading of 10.0) and the thermostat (.4 reading). I believe that the problem will be in the switch for as soon as I turn the knob from "off" to a timed drying setting the dryer turns on without having to push the start button. Note: This dryer has done this for years, but I never had a problem until now. Now the dryer will turn on but after 20-25 minutes it would shut off. I kept an eye on the heating element and the coils would heat up and go out periodically as the dryer was going through its cycle. I believe that it may be a switch problem for I have looked at the wires to the switch and do not see any burnt wires. Your thoughts please?
Hello Marcus,
Thanks for your question. You may also want to check the venting to make sure it is not clogged with anything. The switch or fuse could be the problem. Check the cycling thermostat as well with a multimeter for continuity and replace it if it shows no continuity.
I hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
