Quick Question!

Have you ever purchased from PartSelect.com before?

2003048-1-S-Whirlpool-12001442-Crisper Glass Shelf with Rail
2003048-1-S-Whirlpool-12001442-Crisper Glass Shelf with Rail 2003048-2-S-Whirlpool-12001442-Crisper Glass Shelf with Rail http://www.partselect.com/Schematics/Maytag/50882.gif

Crisper Glass Shelf with Rail

PartSelect Number PS2003048

As per the Manufacturer, this part does come with the center rail.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

SUPPORT- C

Part Number 11743120

$22.10
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 2 reviews What's this?
1-2 of 2
 

2 of 3 people found this instruction helpful

Parts Used:
  • Crisper Glass Shelf with Rail
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Rodney from Forest Hills, NY

Dropped a water pitcher in the fridge and shattered the glass shelf

First, the part arrived within 2 days of ordering. And this part wasn't available anywhere but here. Here's how hard it was to fix:

Open package. Glance over instructions. Slide shelf in groove. Align drawers and mount to shelf.

Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Crisper Glass Shelf with Rail
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Anthony from Niagara Falls, NY

Broken rail

The center plastic rail broke off at the end corner, so the drawer would fall off when pulled to far out.
On the flat glass side of the shelf, I measured the rail position, and made alignment marks with the marker. I cleaned the center area of the shelf where the rail would be put, and then I removed the paper backer on the adhesive strip of the rail. I was sure to have the rail front end towards the shelf front,

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2