See part 6 in the diagram

Electronic Control with Overlay - Almond

PartSelect Number PS2002957

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 1 reviews What's this?
1-1 of 1

4 of 6 people found this instruction helpful

Parts Used

  • Electronic Control with Overlay - Almond

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerMatthew from Middletown DE

Digital display fading out for long periods of time making control of oven difficult.

FIrst had to lift off ceramic range top. It was not attached by any hardware but did have to remove the grounding wire and disconnect the wiring harness (easily unplugs). Wire was attached with a single screw.
Clock had three wire harnesses which unplugged easily and 4 phillips screws holding in oven. Two screw in the top and two accessed from the top inside of oven door frame.
Once clock was removed from oven there were two small brackets attached to the clock that needed to be installed onto the new part. They were held in place with 2 small scews per bracket.
Installed bracket onto new part, installed new part into oven and replaced range top.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1