Quick Question!

Have you ever purchased from PartSelect.com before?

2002890-1-S-Whirlpool-12001187-Lid Switch Kit
2002890-1-S-Whirlpool-12001187-Lid Switch Kit 2002890-2-S-Whirlpool-12001187-Lid Switch Kit 2002890-3-S-Whirlpool-12001187-Lid Switch Kit http://www.partselect.com/Schematics/Maytag/48353.gif

Lid Switch Kit

PartSelect Number PS2002890

The lid switch kit is an assembly for replacing your washer lid switch. The function of this part is to detect if your washer lid is open or closed. If it detects that it is open it will prevent the washer from rotating and agitating until it is closed. This kit includes the bracket, actuator, switch, screws, and wire harness. To complete this installation, you will need a number two Phillips screwdriver, and a 5/16 nut driver. Before beginning this repair, make sure the power supply to your washer is disconnected. In order to install this part, you will need access to the rear of the unit.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not drain.

Compare At

$51.40

You Save

$8.57

Your Price

$42.83
Order within the next 3 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 1 reviews What's this?
1-1 of 1
 

38 of 52 people found this instruction helpful

Parts Used:
  • Lid Switch Kit
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Linda from La Porte, IN

Intermittent problem with lid switch, no high speed spin/pump out

Disconnect power, unsnap and raise machine top cover w/lid, remove old switch - two screws under lid, taking care to not drop loose actuator lever into machine. Remove control panel back and disconnect switch wire connector. Intall new switch, taking care to not drop loose actuator lever into machine, connect switch wires inside control panel. Replace panel cover and lower machine top cover w/lid and snap into place, reconnect power, verify operation...

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1