4 of 5 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsNutdriver, Pliers, Screw drivers, Socket set
CustomerWilliam from Allegan MI
Timer stuck at one spot. Would not complete cycle. Washer kept running during all night and would not shut down.
Removed timer by removing 3 screws unplugged the wiring harness and replaced timer with new one. reinstalled screws and plugged in the wiring harness.
Found a leak at the soap dispenser trip.
Ordered a new wax motor actuator, installed it but found that the soap dispenser is still not working.
Installed a home made rubber trip seal to prevent further leakage. no more leaks dispenser not working. Need help or advise.