1995753-1-S-Whirlpool-10253509Q-Door Handle
1995753-1-S-Whirlpool-10253509Q-Door Handle 1995753-2-S-Whirlpool-10253509Q-Door Handle 1995753-3-S-Whirlpool-10253509Q-Door Handle

Door Handle

PartSelect Number PS1995753

**Please note** If the hinges are on the left side of your refrigerator, then this white handle becomes the refrigerator door handle. Made of mostly plastic, but also of a little metal, this handle has a strip of chrome up one side for decoration.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $100.04
  • You Save

    $16.67
  • Your Price

    $83.37
In Stock
Order within the next 6 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Handle

Part Number 1995755

If the hinges are on the left side of your refrigerator, then this white handle becomes the freezer door handle. Made mostly of plastic, this handle has a strip of metal up one side for decoration.

Order within the next 6 hrs and your part ships today!
$77.39
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 10 reviews What's this?
1-10 of 10
 

5 of 5 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJon from Beaverton OR

Refrigerator door handle broken on top

Use a small slot-head screwdriver to remove the tiny plastic clip on the bottom of the handle, and SAVE it, as none comes with the replacement part. Remove three screws. Remove old door handle. Position new door handle correctly, and insert three screws. Replace small plastic clip on bottom of door handle.

It took me three minutes

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDavid from Palo IA

The door handle had cracked

I removed the old screws, removed the handles and replced the handles with the new handles

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerRic from Clovis CA

Both rails on the crispers broke, and the handles were cracked

unscrewed the side rail and rotated it to remove it from the rest of the assembly. Then ran the humidity tape through the new one and screwed it on. put it back in the ref and put the glass back on and the drawers and it was done!

removed the old handles and replace with the new. It was all very simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDane from Needham MA

Old main door handle cracked, needed replacement

Took off the top screw cover and unscrewed the two screws, removed the bottom screw cover and unscrewed that screw. Lifted off handle, cleaned up the area, put on new handle, replaced the screws, replaced the covers. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerStephen from Richmond VA

Unsightly door handles resisted cleaning

Both handles had become unsightly. Cleaning with various household products failed to restore the white appearance. Use of stronger solvents softened the finish material and made the stain permanent. Replacement of the handles appeared to be the only remedy.

Snap-in covers on the sides of the handles had to be popped to reveal screws, one under each cover. Two other obvious screws were removed. The Amana logo plate had to be removed by un-bending two retention tabs, flipped over, then re-installed. The parts supplied do not include new screws or screw covers, all of which have to be re-used.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

Customerbrigitte from orange park FL

Handles were cracked, was afraid they would fall out

removed the three screws, removed the broken handles, put the new ones in places and screwd the screws that iI had removed back in place. it was very very simple

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerWalter from Bethesda MD

Handle broken

I unscrewed and removed both handles, cleaned up thre surface and replaced them with the new handles. It was easy. The handles were delivered as promised.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRichard from O'Fallon IL

Refrigerator handle was cracked

I removed the cover on the bottom of the old handle exposing 2 screws. I next removed the 2 screws at the top of the handle and the 2 screws at the bottom and removed the old handle. Next, I removed the access cover on the back of the new handle and the removed the Amana logo, fliped the logo so it would be right side up, and then replaced the access cover. Next, I connected the new handle to the door by replacing the 4 screws and then replaced the plastic cover on the bottom that I removed in the first step.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAnn from Sloan IA

Cracked door handle

First removed the screws- took the old door handle off- put the new one on- and screwed it back. Very easy= received the handle in just a few days. Excellent !

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerCharles from Salt Lake City UT

Cracked handle - both freezer & frig

I removed three screws each on the old handles & removed the handles.
I reversed the process by attaching the new handles using the old screws.
All looks great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-10 of 10