| |
25 of 28 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
Customermichael from perry hall MD
Wheel replacement
Pulled the end cap off and replaced the wheel.
most of the parts were for future repairs
|
2 of 2 people found this instruction helpful
Parts Used
-
- Lower Rear Rack Wheel and Axle Kit
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLINDA from OCALA FL
Lost a wheel for dishwasher
REPAIR EASY..SNAP IT IN......IMPRESSED WITH THE SPEEDY DELIVERY. THANKS
|
2 of 3 people found this instruction helpful
Parts Used
-
- Lower Rear Rack Wheel and Axle Kit
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerStacey from Spring TX
Wheel fell off dishwasher rack, landed on heating element and melted.
Simply discarded old wheel assembly and snapped new wheel assembly in place. Very simple.
|
1 of 1 people found this instruction helpful
Parts Used
-
- Lower Rear Rack Wheel and Axle Kit
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerBennett from Burke VA
Broken wheel
Siimply removed the rack and replaced the wheel assembly. Very easy
|
1 of 2 people found this instruction helpful
Parts Used
-
- Lower Rear Rack Wheel and Axle Kit
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerlori from MANHASSET NY
The wheels on our dishwasher were mis-shapen and broken
It was easy as pie. The new wheels came with the new axles already attached, and the whole wheel just snapped onto the lower rack. I ordered 6 and they arrived quickly and attached within minutes, and the dishwasher actually works better now that the rack is raised properly. Thank you!
|
1 of 2 people found this instruction helpful
Parts Used
-
- Lower Rear Rack Wheel and Axle Kit
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerM. from Phoenix AZ
From the three bottom rack wheels on each side, the middle wheels were missing from each side.
I measured the diameter of the working wheels from the existing ones, and located the parts I needed from the website. I order two packages, each containing the wheels and axles for the rack.
When delivered, I snapped the wheels onto the delivered axles. Then, I snapped the axels unto the bottom rack, at the correct place. I used a large pliers for leverage because the axel was a bit tight to just simply snap on.
The middle wheels are located just behind the front wheels, thereby offering support when the botton rack is pulled forward for loading. Likewise, they offer support when the rack is pushed back in place.
|
1 of 2 people found this instruction helpful
Parts Used
-
- Lower Rear Rack Wheel and Axle Kit
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsPliers, Screw drivers
CustomerJane from La Quinta CA
Rear wheels wouldn't roll, so bottom rack had to be lifted into place. Backbreaking.
The most difficult part was removing the old wheels. The plastic coating on the rack had come off, leaving the metal exposed. The wheels had rusted on - that's why they wouldn't roll. Once we got them off with pliers, hammer, screwdriver and basically everything in the tool chest, we were home free. Installing the new wheels and axles was easy.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMichael from Cincinnati OH
Rack roller and jetdry cap were missing
Opened the package, opened the plastic parts bag, installed the roller and the cap.
Whew!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDavid from New Milford CT
Wheels broken on dish rack
once I found the parts I needed (real easy because of drawings), I ordered them, they came and I installed them. It was that simple!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Lower Rear Rack Wheel and Axle Kit
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRichard from Oak Hill FL
4 wheels missing from diswasher rack (lower)
removed the rack and snapped the 4 week/axle assemblies on rack by hand pressure returned rack to track.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerFelix A from Orlando FL
Tray will not roll.
New wheels were inserted in place.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Lower Rear Rack Wheel and Axle Kit
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerAlfred from Aurora CO
Wheels kept coming off of the basket
Just remove the lower basket from the machine and pull the old wheels off. Then snap on the new wheels on the pegs. The old style wheels snap in place without much force. The new wheels take much more force to install and lock onto the basket which keeps them from coming off when the basket is heavily loaded.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Lower Rear Rack Wheel and Axle Kit
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerNick from Chatham NJ
|
0 of 1 people found this instruction helpful
Parts Used
-
- Lower Rear Rack Wheel and Axle Kit
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerTeresa from Phenix City AL
The rear wheels were missing on the lower rack.
The wheels came with a clip on part that clipped to the rack and the wheel snapped into that clip. I am a woman and it was easy for me to do. Thanks to Parts Select for being an easy to use and navigate site, for quick shipment and for good directions with the parts. Sincerely, Teresa from Alabama.
|
0 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWendy Baldwin from Stowe PA
The stud assembly in the middle of each wheel no longer stayed inside the wheel.
Just pulled off the old wheel. I just had to push in the stud to the wheel and pushed it on to the rack of the dishwasher. Very easy repair! Only disappointing part was that it bothered me to have to purchase the stud with the wheel. I was told they only came as the set. I only needed to purchase that inside stud. My wheels were fine.
|