Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS1993409
The drain pump ejects the water from the dishwasher.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
I pulled the dishwasher out.laid it on it's back,and removed and replaced pump.very easy.pump was shipped very quickly,and at a very affordable price.would highly recommend service from parts select.Thank You!!!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Unplugged the dishwasher and pulled it out. Tipped it down on its side. Removed the old and replaced the new. Re-installed and replugged it. Ran a test. Checked for leaks.
pulled DW out from under counter. drained water from unit. laid DW on its side. removed 5 screws from unit 2 to remove drain motor and three to remove bracket. used adj pliers to remove spring clamp and screwdriver to remove other clamp. to install i did the reverse
Unhooked the dishwasher and took it out. Laid the dishwasher on it's back. Located the drain pump and took it off. Put the new one in it's place. Hooked the dishwasher back up and tried it out. Everything sounded and ran good. Easy assembly. Took 30-40 minutes if that.
- Shut off the electricity and water to the unit- Pull the unit out, tip it on its side. Pump is easily accessable on the bottom.- Undo the inlet & outlet hose clamps, two screws, and two wire connectors. (Pay attention to which way they went on.)- Put the new pump in the same way and reconnect everything.- Tip the unit back up and push it into the counter, making sure not to kink the hoses or anything.- That's it. New pump is quiet, and no more smell!
First I pulled out the dishwasher for easier access. Then I looked at the old pump to make sure I connected the wiring in the correct places on the new pump, took out the old, cleaned up the water that spilled out of the line from the old pump, connected the pump to the in and out drain lines, reattached the wiring, screwed it back in place, and was very happy this cost me about a 1/10th of what it would have if I replaced my dishwasher at everyone's recommendation. I works great.
unplugged the dishwasher first then turned it on its side unhooked the silinoid, unscrewed the old part, hooked up the new one it was that easy.
I started by removing all of the water on the inside and the outer casing around the dishwasher, tipped the unit on its side, and removed the old drain pump with the new one. It was a very nice, simple fix and did not take long at all. Your web site came up very quickly through google. I entered in my model number and found the part that i needed right away. It was also no time at all for the shipment to arrive at our hospital; well before the estimated delivery date. Thank you for the availabillity, speediness, and the econo-friendly exspence for the part itself. We will be more than happy to do business with you whenever the time comes again.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.